correct oil pump, and screen.

[Bob Dunahugh]

Our oil pans require a different pickup then a rear wheel drive 403, or 455. James was 100% correct that you can install your old one. If it's PERFECTLY CLEAN. The screen tube is a press fit to the pump. I tack weld it for safety. A sealant isn't required. And isn't a good idea. Bob Dunahugh

 

[jim kanomata1]

If you aquire a new pump and pick up tube, always trial fit it as we have
run into wrong parts from our suppliers.

> Our oil pans require a different pickup then a rear wheel drive 403, or
> 455. James was 100% correct that you can install your old one. If it's
> PERFECTLY CLEAN. The screen tube is a press fit to the pump. I tack weld it
> for safety. A sealant isn't required. And isn't a good idea. Bob Dunahugh
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>

--
Jim Kanomata
Applied/GMC, Newark,CA
jimk
http://www.appliedgmc.com
1-800-752-7502