Connecting air tank behind front bumper

[don w pontious]

I am reinstalling the air tank on the frame rail behind the front bumper. I need to know where to put the pressure switch. Where does all the wiring come from and go to (from the fuse block to the pressure switch then the compressor)? Where are the wires located and possible color? I need to know the lay out between the air compressor to the red main air line that goes into the dash, including all the air fittings on the tank.

The coach is a 74 Sequioa.

The system was completely removed when I purchased the coach. I am only familiar with the Electro Level I system.

Thanks
Don

Free web-based email, Forever, From anywhere!
http://www.mailexcite.com

 

[don w pontious]

I am reinstalling the air tank on the frame rail behind the front bumper. I need to know where to put the pressure switch. Where does all the wiring come from and go to (from the fuse block to the pressure switch then the compressor)? Where are the wires located and possible color? I need to know the lay out between the air compressor to the red main air line that goes into the dash, including all the air fittings on the tank.

The coach is a 74 Sequioa.

The system was completely removed when I purchased the coach. I am only familiar with the Electro Level I system.

Thanks
Don

Free web-based email, Forever, From anywhere!
http://www.mailexcite.com

 

[don w pontious]

I am reinstalling the air tank on the frame rail behind the front bumper. I need to know where to put the pressure switch. Where does all the wiring come from and go to (from the fuse block to the pressure switch then the compressor)? Where are the wires located and possible color? I need to know the lay out between the air compressor to the red main air line that goes into the dash, including all the air fittings on the tank.

The coach is a 74 Sequioa.

The system was completely removed when I purchased the coach. I am only familiar with the Electro Level I system.

Thanks
Don

Free web-based email, Forever, From anywhere!
http://www.mailexcite.com

 

[thomas g. warner]

I think you are making a big mistake putting it behind the from bumper
unless you are talking about inside front end ot the right of the front
tire. The information that you need is located in the service manual for
the coach and you can buy it at Cinnabar Mfg.

>I am reinstalling the air tank on the frame rail behind the front bumper.
I need to know where to put the pressure switch. Where does all the wiring
come from and go to (from the fuse block to the pressure switch then the
compressor)? Where are the wires located and possible color? I need to
know the lay out between the air compressor to the red main air line that
goes into the dash, including all the air fittings on the tank.
>
>The coach is a 74 Sequioa.
>
>The system was completely removed when I purchased the coach. I am only
familiar with the Electro Level I system.
>
>Thanks
>Don
>
>
>
>Free web-based email, Forever, From anywhere!
>http://www.mailexcite.com
>
>