Clips for wire management windshield main support.

[david1]

hi all I'm looking for a clip of some sort perhaps one that someone's made on a 3D printer or has found one that fits/clips onto the center
windshield support in order to hold/contain wires. I run two fans mounted near the rear view mirror, that plug into the cigarette lighter and the
wire runs up the center support of the windshield. I've use tape,velcro hot glue and all have fIled in the Heat of Summer. I was looking for some
sort of clip as there is a edge on the center support that seems like a cover or small clip could latch onto. This would also be helpful for anybody
that has a TPS or window mounted radar detector to contain or by the wires.. Anybody come up with a solution? I know I could always hardwire the fans
and run the wire someplace behind the top cap but I was looking for something a little more straightforward.
--
'78 Palm Beach. car nut new to RV'ing 26 ft. 403 rebuilt in 2018, rebuilt tranny in 2014, Dave Lenzi knuckles & hubs, yada yada yada OEM chromed
wheels,Green Brady Bunch stock

 

[jim kanomata1]

https://www.gmcrvparts.com/product-p/gm23-060-6.htm

On Mon, Aug 5, 2019 at 5:02 PM David via Gmclist
wrote:

> hi all I'm looking for a clip of some sort perhaps one that someone's
> made on a 3D printer or has found one that fits/clips onto the center
> windshield support in order to hold/contain wires. I run two fans mounted
> near the rear view mirror, that plug into the cigarette lighter and the
> wire runs up the center support of the windshield. I've use tape,velcro
> hot glue and all have fIled in the Heat of Summer. I was looking for some
> sort of clip as there is a edge on the center support that seems like a
> cover or small clip could latch onto. This would also be helpful for anybody
> that has a TPS or window mounted radar detector to contain or by the
> wires.. Anybody come up with a solution? I know I could always hardwire the
> fans
> and run the wire someplace behind the top cap but I was looking for
> something a little more straightforward.
> --
> '78 Palm Beach. car nut new to RV'ing 26 ft. 403 rebuilt in 2018, rebuilt
> tranny in 2014, Dave Lenzi knuckles & hubs, yada yada yada OEM chromed
> wheels,Green Brady Bunch stock
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>

--
Jim Kanomata
Applied/GMC, Newark,CA
jimk
http://www.appliedgmc.com
1-800-752-7502

 

[emerystora]

That center support is hollow. I have wires running through it.

Emery Stora

>
> hi all I'm looking for a clip of some sort perhaps one that someone's made on a 3D printer or has found one that fits/clips onto the center
> windshield support in order to hold/contain wires. I run two fans mounted near the rear view mirror, that plug into the cigarette lighter and the
> wire runs up the center support of the windshield. I've use tape,velcro hot glue and all have fIled in the Heat of Summer. I was looking for some
> sort of clip as there is a edge on the center support that seems like a cover or small clip could latch onto. This would also be helpful for anybody
> that has a TPS or window mounted radar detector to contain or by the wires.. Anybody come up with a solution? I know I could always hardwire the fans
> and run the wire someplace behind the top cap but I was looking for something a little more straightforward.
> --
> '78 Palm Beach. car nut new to RV'ing 26 ft. 403 rebuilt in 2018, rebuilt tranny in 2014, Dave Lenzi knuckles & hubs, yada yada yada OEM chromed
> wheels,Green Brady Bunch stock
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

 

[johnny]

I have two fans mounted on the mirror mount. Their wire runs inside the windshield center piece - it's hollow.

--johnny
--
Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons.
Braselton, Ga.
I forgive them all, save those who hurt the dogs. They must answer to me in hell

 

[adolph santorine]

Walt Haley has a solid works file that makes nice clips if you want to go that way.

I know it’s a hollow response (pun intended), but I drilled a little hole and ran the wire in the windshield center support.

It’s, I dare say, hollow……..

Dolph

DE AD0LF

Wheeling, West Virginia

1977 26’ ex-PalmBeach
Howell EFI & EBL, Reaction Arms, Manny Transmission

“The Aluminum and Fiberglass Mistress"

>
> I have two fans mounted on the mirror mount. Their wire runs inside the windshield center piece - it's hollow.
>
> --johnny
> --
> Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons.
> Braselton, Ga.
> I forgive them all, save those who hurt the dogs. They must answer to me in hell
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

 

[mghamms]

I'm not sure but me thinks the radio antenna lead runs through my center channel.
--
1977 Kingsley 455 as stock as it gets except lots of Ragusa parts

 

[Jim Hupy]

Yes, on my coach, it has an antenna on the roof. I put another one up there
for serious radio. Ran both leads through the window channel.
Jim Hupy

On Fri, Aug 9, 2019, 1:21 PM Mike Hamm via Gmclist
wrote:

> I'm not sure but me thinks the radio antenna lead runs through my center
> channel.
> --
> 1977 Kingsley 455 as stock as it gets except lots of Ragusa parts
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>

 

[emerystora]

Yes it does but there is room for more. I also had a CB antenna lead which is still there but no longer used. There is plenty of room for more wires.

Emery Stora

>
> Yes, on my coach, it has an antenna on the roof. I put another one up there
> for serious radio. Ran both leads through the window channel.
> Jim Hupy
>
> On Fri, Aug 9, 2019, 1:21 PM Mike Hamm via Gmclist

>
>> I'm not sure but me thinks the radio antenna lead runs through my center
>> channel.
>> --
>> 1977 Kingsley 455 as stock as it gets except lots of Ragusa parts
>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org