Choke Stove

[darren paget]

I'd like to help Arch, but the setup I now have is too different. If it
is worth anything I removed the air preheat from mine and also blocked
the crossovers. If you look at how much of a restriction the flapper in
the snorkel creates you will understand why I deleted it. I also went to
a 3" exhaust which means More flow out needs more flow in. My
thoughts, for what there worth. Darren

> GMCers
>
> I have a question. My engine does not have the sheet metal shroud
> that goes over the exhaust manifold to supply warm air to the carb.
> Remember I have blocked off the crossovers. Is it worth the effort
> to find and install one? Any and all thoughts will be listened to and
> considered.
>
> Take Care
> Arch

- --
Darren Paget
76 Experimental
Another Fab Day
http://www.TZEplus.com

 

[gene]

did you eliminate the two mufflers ??

gene

>I'd like to help Arch, but the setup I now have is too different. If it
>is worth anything I removed the air preheat from mine and also blocked
>the crossovers. If you look at how much of a restriction the flapper in
>the snorkel creates you will understand why I deleted it. I also went to
>a 3" exhaust which means More flow out needs more flow in. My
>thoughts, for what there worth. Darren
>

>
>> GMCers
>>
>> I have a question. My engine does not have the sheet metal shroud
>> that goes over the exhaust manifold to supply warm air to the carb.
>> Remember I have blocked off the crossovers. Is it worth the effort
>> to find and install one? Any and all thoughts will be listened to and
>> considered.
>>
>> Take Care
>> Arch
>
>--
> Darren Paget
> 76 Experimental
> Another Fab Day
> http://www.TZEplus.com
>
>
>
Genef -- 77PB/ore/ca
GMC MOTORHOME INFORMATION
mr.erf
http://www.california.com/~eagle/

 

[darren paget]

I have two high flow mufflers now. Dimensions would be 16" long x 10 wide.
The smallest restriction in the mufflers is 2.75". They are also stainless
steel with lifetime warranty. I also have the stock exhaust manifolds which
were recommended to keep. Darren

> did you eliminate the two mufflers ??
>
> gene
>

> >I'd like to help Arch, but the setup I now have is too different. If it
> >is worth anything I removed the air preheat from mine and also blocked
> >the crossovers. If you look at how much of a restriction the flapper in
> >the snorkel creates you will understand why I deleted it. I also went to
> >a 3" exhaust which means More flow out needs more flow in. My
> >thoughts, for what there worth. Darren
> >

> >
> >> GMCers
> >>
> >> I have a question. My engine does not have the sheet metal shroud
> >> that goes over the exhaust manifold to supply warm air to the carb.
> >> Remember I have blocked off the crossovers. Is it worth the effort
> >> to find and install one? Any and all thoughts will be listened to and
> >> considered.
> >>
> >> Take Care
> >> Arch
> >
> >--
> > Darren Paget
> > 76 Experimental
> > Another Fab Day
> > http://www.TZEplus.com
> >
> >
> >
> Genef -- 77PB/ore/ca
> GMC MOTORHOME INFORMATION
> mr.erf
> http://www.california.com/~eagle/

- --
Darren Paget
76 Experimental
Another Fab Day
http://www.TZEplus.com