Hello all,
Does anyone know the part number for the 80mm front Caliper pin/bushing grommets and dust boots and the same for the Applied Phase II rear brake
calipers? I have the bushings and pins.
I bought the 80mm front calipers and the Phase II rear brakes, but some of the calipers had grommets installed and some did not. It is not worth
shipping such a small item across the country. I just need the caliper part numbers or the grommet and boot part numbers?
Thanks in advance again and all take care,
Tom K.
--
Tom & Oki Katzenberger,
Kingsville, Maryland,
1977 23' Birchaven, 455 C.I.D.
Does anyone know the part number for the 80mm front Caliper pin/bushing grommets and dust boots and the same for the Applied Phase II rear brake
calipers? I have the bushings and pins.
I bought the 80mm front calipers and the Phase II rear brakes, but some of the calipers had grommets installed and some did not. It is not worth
shipping such a small item across the country. I just need the caliper part numbers or the grommet and boot part numbers?
Thanks in advance again and all take care,
Tom K.
--
Tom & Oki Katzenberger,
Kingsville, Maryland,
1977 23' Birchaven, 455 C.I.D.