Frank,
Take picture please!
Patrick
>
> Parts Required.
> >From 76 through 78 EDORADO & SEVILLE rear brakes. 4 Backing Plates, 4
> Calipers with parking brakes built in, 4 Rotors, 4 Flex hoses 10" to 12"
> long, 1 Master Cylinder 34mm, 8 Grade-8 Bolts 3/8 x 3 1/2, Angle iron
> 18" x1" x 1" x 1/16". There is machine work to be done on backing plates
> and rotors. The first part of December will go to Louisville to have
> machine work done. The person who has this on his coach lives there. We
> should wait till I can report first hand work involved to make this
> conversion. Will give a full report then. Start hunting for parts they
> may be hard to find.
- --
Patrick Flowers
Mailto
atri63
The GMC Motorhome Page
http://www.gmcmotorhome.com
Take picture please!
Patrick
>
> Parts Required.
> >From 76 through 78 EDORADO & SEVILLE rear brakes. 4 Backing Plates, 4
> Calipers with parking brakes built in, 4 Rotors, 4 Flex hoses 10" to 12"
> long, 1 Master Cylinder 34mm, 8 Grade-8 Bolts 3/8 x 3 1/2, Angle iron
> 18" x1" x 1" x 1/16". There is machine work to be done on backing plates
> and rotors. The first part of December will go to Louisville to have
> machine work done. The person who has this on his coach lives there. We
> should wait till I can report first hand work involved to make this
> conversion. Will give a full report then. Start hunting for parts they
> may be hard to find.
- --
Patrick Flowers
Mailto
atri63The GMC Motorhome Page
http://www.gmcmotorhome.com
