Cabinet Locks

[tom & cindy]

> Date: Sat, 27 May 2000 00:30:58 EDT
> From: Gcbr
> Subject: GMC: Cabinet Locks
>
> GMCers
>
> I have done a lot of research on trying to find replacements for the
> roller locks for our cabinets. Some of you may know this but here
> is what I found. There is a roller lock that is almost an exact replacement
> for ours. It is made by Amerock part # BP9823-2G. The barcode # is
> 026634108240. Hope this helps. I have several installed. The roller
> is an exact replacement. The striker plate is close enough that only on
> some of them did I have to drill one new hole.
>
> Take Care
> Arch

Arch,

I need to replace a few roller locks, too. Where did you find the Amerock
replacements? Did you have to special order them? Thanks for the research you've
already done.

Tom
75 PB
Colorado (soon to be Arizona)

 

[peter brandt]

Tom,

I bought replacement roller locks a few months ago at True Value here in
Glenwood Springs.
The Amerock # is BP3474-14

Peter
77 Eleganza II
Colorado

- ----- Original Message -----
From: "Tom & Cindy"
To:
Sent: Saturday, May 27, 2000 1:47 PM
Subject: Re: GMC: Cabinet Locks

> > Date: Sat, 27 May 2000 00:30:58 EDT
> > From: Gcbr
> > Subject: GMC: Cabinet Locks
> >
> > GMCers
> >
> > I have done a lot of research on trying to find replacements for the
> > roller locks for our cabinets. Some of you may know this but here
> > is what I found. There is a roller lock that is almost an exact
replacement
> > for ours. It is made by Amerock part # BP9823-2G. The barcode # is
> > 026634108240. Hope this helps. I have several installed. The roller
> > is an exact replacement. The striker plate is close enough that only on
> > some of them did I have to drill one new hole.
> >
> > Take Care
> > Arch
>
> Arch,
>
> I need to replace a few roller locks, too. Where did you find the Amerock
> replacements? Did you have to special order them? Thanks for the
research you've
> already done.
>
> Tom
> 75 PB
> Colorado (soon to be Arizona)
>
>

 

[tom & cindy]

> Date: Sat, 27 May 2000 14:58:05 -0600
> From: "Peter Brandt"
> Subject: Re: GMC: Cabinet Locks
>
> I bought replacement roller locks a few months ago at True Value here in
> Glenwood Springs.
> The Amerock # is BP3474-14

> Date: Sat, 27 May 2000 19:53:54 EDT
> From: Gcbr
> Subject: Re: GMC: Cabinet Locks
>
> They were off the shelf at my Lowes Store.
>

Peter, Arch:

Thanks for the leads. I'll check out Eagle (a Lowes store) or True Value today.

Tom
75 PB
Colorado (soon to be Arizona)