Brake rotor?

[john wright]

Unless someone else has the number the only place you can get the rotor
for the front is from one of the GMC Motor homes part suppliers.

J.R. Wright

>
> Can someone tell me the part # for a brake rotor at NAPA or Autozone IF they
> have one that will fit?
> Thanks,
>
> David

 

[john wright]

Scott,
I am sure that they are available from someone, but I don't have a cross
part number.

J.R. Wright

>
> In a message dated 5/17/99 7:57:16 PM Eastern Daylight Time, powerjon

>
> > for the front is from one of the GMC Motor homes part suppliers
>
> We have got to be able to find these rotors in some other application. I
> don't think GM would make these just for our motorhomes. They must be 3/4 or
> 1 ton truck rotors. I will try to find some that fit. Don't hold your
> breath though and keep breathing.
>
> Scott PARTS and
> Underneath your GMC
>

 

[william hubert]

How bout ordering up a 75 Toronado rotor about $36 st Auto Zone. The
caliper is an exact match

>In a message dated 5/17/99 7:57:16 PM Eastern Daylight Time, powerjon
>writes:
>
>> for the front is from one of the GMC Motor homes part suppliers
>
>We have got to be able to find these rotors in some other application. I
>don't think GM would make these just for our motorhomes. They must be 3/4
or
>1 ton truck rotors. I will try to find some that fit. Don't hold your
>breath though and keep breathing.
>
>Scott PARTS and
>Underneath your GMC
>
>
>

 

[william hubert]

I happen to have the hub off to replace CV Boot. The Brake Rotor bolts to
the hub from the inboard side with 4 bolts. The whell hub studs do not
pass through the rotor.

>In a message dated 5/17/99 11:38:18 PM Eastern Daylight Time,

>
>> How bout ordering up a 75 Toronado rotor about $36 st Auto Zone. The
>> caliper is an exact match
>>
>Hi William!
>Boy that would be great, I don't think they are eight lug though.
>
>Scott NEHODA'S
>BACK YARD
>
>
>

 

[thomas g. warner]

Toronados do not have 4 bolts either

>I happen to have the hub off to replace CV Boot. The Brake Rotor bolts to
>the hub from the inboard side with 4 bolts. The whell hub studs do not
>pass through the rotor.
>
>

>>In a message dated 5/17/99 11:38:18 PM Eastern Daylight Time,

>>
>>> How bout ordering up a 75 Toronado rotor about $36 st Auto Zone. The
>>> caliper is an exact match
>>>
>>Hi William!
>>Boy that would be great, I don't think they are eight lug though.
>>
>>Scott NEHODA'S
>>BACK YARD
>>
>>
>>
>
>
>
Tom & Marg Warner
Vernon Center NY
1976 palmbeach
"The beautiful Mohawk Vally"

 

[richard bachert]

Well, that takes care of THAT! Darn it!!!
Scott, recon they could be drilled to an 8 lug pattern?
Dick

>In a message dated 5/17/99 11:38:18 PM Eastern Daylight Time,

>
>> How bout ordering up a 75 Toronado rotor about $36 st Auto Zone. The
>> caliper is an exact match
>>
>Hi William!
>Boy that would be great, I don't think they are eight lug though.
>
>Scott NEHODA'S
>BACK YARD
>
>