Body Frame Pads

>
> I have a 73 with the long spacer and it is definitely flattened over the years.
> There is barely room for the brake lines to pass between the frame and the body panels.
> From first glance, they look ok, but that is because they got squished out.
> I know the body has dropped because the top of the black tank was crushed in from the hard mounted toilet flange.
> There was no slip fitting, or o-ring, just a threaded drain pipe.
> I will be replacing the pads as soon as weather permits.
> --
> 1973 GMC 26' Glacier - Unknown Mileage - Has a new switch pitch transmission with Powerdrive
>

For those of you asking about the placement of the pads here is a diagram.

http://www.gmcmhphotos.com/photos/g4257-frame-pads.html http://www.gmcmhphotos.com/photos/g4257-frame-pads.html

Note that they are doubled up at the bogies.

Emery Stora
77 Kingsley
Frederick, CO