Best way to remove SolAire furnace

[advanced concept energy solutions]

What is the best way to remove SolAire furnace from 76 Palm Beach? It is in cabinet under sink. Removed mounting screws on sides but still solid. Looks like I have to remove couch at a minimum. Tried cutting it up in place without much luck. At this point I have no intention of replacing it and will use electric heat. Any help or pictures would be appreciated.

Jon Darcy ACES
646-464-3123

 

[sgltrac]

I took the kitchen cabinet module out and then there is plenty of access to
remove furnace.

Sully
77 eleganza 2 ( formerly solaire heated)
Bellevue, wa.

On Mon, Sep 11, 2017 at 6:58 AM Advanced Concept Energy Solutions <

> What is the best way to remove SolAire furnace from 76 Palm Beach? It is
> in cabinet under sink. Removed mounting screws on sides but still solid.
> Looks like I have to remove couch at a minimum. Tried cutting it up in
> place without much luck. At this point I have no intention of replacing it
> and will use electric heat. Any help or pictures would be appreciated.
>
> Jon Darcy ACES
> 646-464-3123
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>

 

[terry1]

probably fastened to the exhaust outlet with a screw.
--
Terry Kelpien

ASE Master Technician

73 Glacier 260

Smithfield, Va.

 

[shaun]

Couch comes out easy. The hardest part will be removing the intake and exhaust pipes from the outside. I ended up using a sawzall to cut the pipes
into halves so I could separate them from the furnace. Let me know if you need any more tips

--
1977 Palm Beach, 455, mostly stock and original

 

[johnny]

I dunno how the PO got the sol-aire out of mine. It has a nice new Suburban which slides in through the cabinet door after the bottom brace was cut
about halfway down to let it clear. Just put a new $19 Ace Hardware thermostat on it today and tested - headed for Chattanooga in a couple of days, I
might need it.

--johnny
--
76 26' Eleganza(?) with beaucoup mods and add - ons.
Braselton, Ga.
"I forgive them all, save those who hurt the dogs. They must answer to me in hell" - ol Andy, paraphrased

 

[advanced concept energy solutions]

Thanks for the input. I don't know if I am ready to remove sink cabinet until I can afford replacement. The couch is probably the best way if I can get it out that side without butchering up the cabinet.

Jon Darcy 76 Stretch 4 bag Manny trans, Lots of cash, North Jersey
646-464-3123