Bearings and seals for rear wheels

[richard bachert]

Emery, Good stuff. Thanks. You have once again demonstrated your
clairvoyance!
Gettin' ready to buy new seals. Bearings look and feel brand new so gonna
leave 'em alone.
Dick 75 PB in Atlanta

>I decided to replace some of my rear bearings and cones and I needed new
>seals for the installation of my disc brake kit. I went to AutoZone and they
>only had one seal and no bearings. Same with Pep Boys and Car Quest.
>Finally went to Checker (known as Kragen on the left coast). Checker had all
>the parts in stock and were cheaper than AutoZone. They carried Chicago
>Rawhide (CR) which is an old line US manufacturer. When you look closely at
>the inside bearings you see "Mexico" on them!! The outside bearings are made
>in Germany. The outside cones and seals made in USA.
>
>The seals are Part No.21771 and costs $3.89 each.
>The inner cone (cup) is LM501310 , $3.89.
>The inner bearing is LM501349 , $8.29.
>The outer cone is BR15243, don't remember the cost.
>The outer bearing is 15103-S, don't remember the cost.
>
>Emery Stora
>77 Kingsley
>Santa Fe, NM
>

 

[voyager]

Emery,
I was just going to post a message requesting this info. When I got the
coach it came with most of this stuff in a box. All new. Was going to post
part numbers. No need now.
Thanks for your timely reply...:.)
Rob Teed 74 Painted Desert
( Pray for the children )

> -----Original Message-----
> From: owner-gmcmotorhome
> [mailtowner-gmcmotorhome]On Behalf Of
> EMERYSTORA
> Sent: Thursday, April 22, 1999 5:05 PM
> To: gmcmotorhome
> Subject: GMC: Bearings and seals for rear wheels
>
>
> I decided to replace some of my rear bearings and cones and I needed new
> seals for the installation of my disc brake kit. I went to
> AutoZone and they
> only had one seal and no bearings. Same with Pep Boys and Car Quest.
> Finally went to Checker (known as Kragen on the left coast).
> Checker had all
> the parts in stock and were cheaper than AutoZone. They carried Chicago
> Rawhide (CR) which is an old line US manufacturer. When you look
> closely at
> the inside bearings you see "Mexico" on them!! The outside
> bearings are made
> in Germany. The outside cones and seals made in USA.
>
> The seals are Part No.21771 and costs $3.89 each.
> The inner cone (cup) is LM501310 , $3.89.
> The inner bearing is LM501349 , $8.29.
> The outer cone is BR15243, don't remember the cost.
> The outer bearing is 15103-S, don't remember the cost.
>
> Emery Stora
> 77 Kingsley
> Santa Fe, NM
>