Awning arm measurement needed.

Mine looks like 12.5” upper and 7” lower, measured along the body not the awning tube.



>
> Hi folks....could i trouble someone with a Zip Dee awning to do a couple quick measurements for me? Nothing to take apart just a measuring tape and
> from the side....doesn't have to be super accurate just need some numbers to start with.....thanks
>
> see link for pic of what i need.... http://www.gmcmhphotos.com/photos/exterior/p67642-awning-arms-measurement.html
> --
> Rich Mondor,
>
> Brockville, ON
>
> 77 Hughes 2600
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
 
I can help you, but need clarification .
Call me 800-752-7502
We have all the data and have ones installed as we are a Major Zip Dee
dealer.

On Mon, Sep 28, 2020 at 7:22 AM 6cuda6--- via Gmclist <

> Hi folks....could i trouble someone with a Zip Dee awning to do a couple
> quick measurements for me? Nothing to take apart just a measuring tape and
> from the side....doesn't have to be super accurate just need some numbers
> to start with.....thanks
>
> see link for pic of what i need....
> http://www.gmcmhphotos.com/photos/exterior/p67642-awning-arms-measurement.html
> --
> Rich Mondor,
>
> Brockville, ON
>
> 77 Hughes 2600
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>

--
Jim Kanomata
Applied/GMC, Newark,CA
jimk
http://www.gmcrvparts.com
1-800-752-7502
 
Thanks for this...so just to be clear you went from the upper bracket are to the approx upper tube junction and the from the lower bracket to the tube
but on the body correct? did you contour the measuring tape or just lay it straight on there?

> Mine looks like 12.5” upper and 7” lower, measured along the body not the awning tube.
>
>

> >
> > Hi folks....could i trouble someone with a Zip Dee awning to do a couple quick measurements for me? Nothing to take apart just a measuring
> > tape and
> > from the side....doesn't have to be super accurate just need some numbers to start with.....thanks
> >
> > see link for pic of what i need.... http://www.gmcmhphotos.com/photos/exterior/p67642-awning-arms-measurement.html
> > --
> > Rich Mondor,
> >
> > Brockville, ON
> >
> > 77 Hughes 2600
> >
> > _______________________________________________
> > GMCnet mailing list
> > Unsubscribe or Change List Options:
> > http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

--
Rich Mondor,

Brockville, ON

77 Hughes 2600
 
Jim....i hate calling you buddy but this time i better....i left you a voice mail.

> I can help you, but need clarification .
> Call me 800-752-7502
> We have all the data and have ones installed as we are a Major Zip Dee
> dealer.
>
> On Mon, Sep 28, 2020 at 7:22 AM 6cuda6--- via Gmclist <

>
> > Hi folks....could i trouble someone with a Zip Dee awning to do a couple
> > quick measurements for me? Nothing to take apart just a measuring tape and
> > from the side....doesn't have to be super accurate just need some numbers
> > to start with.....thanks
> >
> > see link for pic of what i need....
> > http://www.gmcmhphotos.com/photos/exterior/p67642-awning-arms-measurement.html
> > --
> > Rich Mondor,
> >
> > Brockville, ON
> >
> > 77 Hughes 2600
> >
> > _______________________________________________
> > GMCnet mailing list
> > Unsubscribe or Change List Options:
> > http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
> >
>
>
> --
> Jim Kanomata
> Applied/GMC, Newark,CA
> jimk
> http://www.gmcrvparts.com
> 1-800-752-7502
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

--
Rich Mondor,

Brockville, ON

77 Hughes 2600
 
I have lot of people call me and find time to talk to ALL.
What makes you think I do not like to help people???

On Mon, Sep 28, 2020 at 8:39 AM 6cuda6--- via Gmclist <

> Jim....i hate calling you buddy but this time i better....i left you a
> voice mail.
>
>

> > I can help you, but need clarification .
> > Call me 800-752-7502
> > We have all the data and have ones installed as we are a Major Zip Dee
> > dealer.
> >
> > On Mon, Sep 28, 2020 at 7:22 AM 6cuda6--- via Gmclist <

> >
> > > Hi folks....could i trouble someone with a Zip Dee awning to do a
> couple
> > > quick measurements for me? Nothing to take apart just a measuring
> tape and
> > > from the side....doesn't have to be super accurate just need some
> numbers
> > > to start with.....thanks
> > >
> > > see link for pic of what i need....
> > >
> http://www.gmcmhphotos.com/photos/exterior/p67642-awning-arms-measurement.html
> > > --
> > > Rich Mondor,
> > >
> > > Brockville, ON
> > >
> > > 77 Hughes 2600
> > >
> > > _______________________________________________
> > > GMCnet mailing list
> > > Unsubscribe or Change List Options:
> > > http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
> > >
> >
> >
> > --
> > Jim Kanomata
> > Applied/GMC, Newark,CA
> > jimk
> > http://www.gmcrvparts.com
> > 1-800-752-7502
> > _______________________________________________
> > GMCnet mailing list
> > Unsubscribe or Change List Options:
> > http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
>
> --
> Rich Mondor,
>
> Brockville, ON
>
> 77 Hughes 2600
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>

--
Jim Kanomata
Applied/GMC, Newark,CA
jimk
http://www.gmcrvparts.com
1-800-752-7502
 
Yes, on upper, base of end piece casting (where square tube enters) to where square tube enters larger square tube. On lower, where tube enters larger tube to hinge pin on body casting. I measured in a straight line with the tape against the body for both. If you want the measurement along the centreline of the tube, I can do that also…

Neil Roach
1977 Kingsley 26’
Mostly Stock
Calgary, Alberta, Canada

>
> Thanks for this...so just to be clear you went from the upper bracket are to the approx upper tube junction and the from the lower bracket to the tube
> but on the body correct? did you contour the measuring tape or just lay it straight on there?
>

>> Mine looks like 12.5” upper and 7” lower, measured along the body not the awning tube.
>>
>>

>>>
>>> Hi folks....could i trouble someone with a Zip Dee awning to do a couple quick measurements for me? Nothing to take apart just a measuring
>>> tape and
>>> from the side....doesn't have to be super accurate just need some numbers to start with.....thanks
>>>
>>> see link for pic of what i need.... http://www.gmcmhphotos.com/photos/exterior/p67642-awning-arms-measurement.html
>>> --
>>> Rich Mondor,
>>>
>>> Brockville, ON
>>>
>>> 77 Hughes 2600
>>>
>>> _______________________________________________
>>> GMCnet mailing list
>>> Unsubscribe or Change List Options:
>>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>
>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
>
> --
> Rich Mondor,
>
> Brockville, ON
>
> 77 Hughes 2600
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
 
Jim thank you for the geat info and the quick phone chat....i think im going to have ti bug you more in the futur.....lol.

> I have lot of people call me and find time to talk to ALL.
> What makes you think I do not like to help people???
>
> On Mon, Sep 28, 2020 at 8:39 AM 6cuda6--- via Gmclist <

>
> > Jim....i hate calling you buddy but this time i better....i left you a
> > voice mail.
> >
> >

> >> I can help you, but need clarification .
> >> Call me 800-752-7502
> >> We have all the data and have ones installed as we are a Major Zip Dee
> >> dealer.
> >>

> >>
> >>> Hi folks....could i trouble someone with a Zip Dee awning to do a
> > couple
> >>> quick measurements for me? Nothing to take apart just a measuring
> > tape and
> >>> from the side....doesn't have to be super accurate just need some
> > numbers
> >>> to start with.....thanks
> >>>
> >>> see link for pic of what i need....
> >>>
> > http://www.gmcmhphotos.com/photos/exterior/p67642-awning-arms-measurement.html
> >>> --
> >>> Rich Mondor,
> >>>
> >>> Brockville, ON
> >>>
> >>> 77 Hughes 2600
> >>>
> >>> _______________________________________________
> >>> GMCnet mailing list
> >>> Unsubscribe or Change List Options:
> >>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
> >>>
> >>
> >>
> >> --
> >> Jim Kanomata
> >> Applied/GMC, Newark,CA
> >> jimk
> >> http://www.gmcrvparts.com
> >> 1-800-752-7502
> >> _______________________________________________
> >> GMCnet mailing list
> >> Unsubscribe or Change List Options:
> >> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
> >
> >
> > --
> > Rich Mondor,
> >
> > Brockville, ON
> >
> > 77 Hughes 2600
> >
> > _______________________________________________
> > GMCnet mailing list
> > Unsubscribe or Change List Options:
> > http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
> >
>
>
> --
> Jim Kanomata
> Applied/GMC, Newark,CA
> jimk
> http://www.gmcrvparts.com
> 1-800-752-7502
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

--
Rich Mondor,

Brockville, ON

77 Hughes 2600
 
Nope thats perfect....i should have everything i need ...thanks a bunch guys!!!

> Yes, on upper, base of end piece casting (where square tube enters) to where square tube enters larger square tube. On lower, where tube enters
> larger tube to hinge pin on body casting. I measured in a straight line with the tape against the body for both. If you want the measurement along
> the centreline of the tube, I can do that also…
>
> Neil Roach
> 1977 Kingsley 26’
> Mostly Stock
> Calgary, Alberta, Canada
>
>

> >
> > Thanks for this...so just to be clear you went from the upper bracket are to the approx upper tube junction and the from the lower bracket to
> > the tube
> > but on the body correct? did you contour the measuring tape or just lay it straight on there?
> >

> >> Mine looks like 12.5” upper and 7” lower, measured along the body not the awning tube.
> >>
> >>

> >>>
> >>> Hi folks....could i trouble someone with a Zip Dee awning to do a couple quick measurements for me? Nothing to take apart just a measuring
> >>> tape and
> >>> from the side....doesn't have to be super accurate just need some numbers to start with.....thanks
> >>>
> >>> see link for pic of what i need.... http://www.gmcmhphotos.com/photos/exterior/p67642-awning-arms-measurement.html
> >>> --
> >>> Rich Mondor,
> >>>
> >>> Brockville, ON
> >>>
> >>> 77 Hughes 2600
> >>>
> >>> _______________________________________________
> >>> GMCnet mailing list
> >>> Unsubscribe or Change List Options:
> >>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
> >>
> >>
> >> _______________________________________________
> >> GMCnet mailing list
> >> Unsubscribe or Change List Options:
> >> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
> >
> >
> > --
> > Rich Mondor,
> >
> > Brockville, ON
> >
> > 77 Hughes 2600
> >
> > _______________________________________________
> > GMCnet mailing list
> > Unsubscribe or Change List Options:
> > http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

--
Rich Mondor,

Brockville, ON

77 Hughes 2600
 
You must log in or register to reply here.
Applied GMC
Get your shine on at www.cruzingear.co

Share this page

Share this page
Top Bottom
Back