Audiovox cruise control (reply to HB)

[mark grady]

Herm,

Haven't yet. My message thread was to see which model the discussion was
about.

Still planning, not yet doing.

> -----Original Message-----
> From: owner-gmcmotorhome
> [mailtowner-gmcmotorhome]On Behalf Of herm beeck
> Sent: Saturday, June 13, 1998 4:14 PM
> To: gmcmotorhome
> Subject: RE: GMC: Audiovox cruise control (reply to PB)
>
>
> Mark
> How did you attach the lever #250-4153 on your turn signal lever?
> Hermann
{snip}

 

[bartz paul]

Herm:

You have to cut off the turn signal lever a certain distance
(approximately to one-half it's original length) and them slip the
Audiovox handle/control head on the stub and tighten two set screws.
Wires from the lever then have to be routed and connected also.

Paul Bartz

> From: Mark Grady [SMTP:mgrady]
> Sent: Sunday, June 14, 1998 11:23 AM
> Subject: RE: GMC: Audiovox cruise control (reply to HB)
>
> Herm,
>
> Haven't yet. My message thread was to see which model the discussion
> was about.
>
> Still planning, not yet doing.
>
> From: owner-gmcmotorhome
> [mailtowner-gmcmotorhome]On Behalf Of herm beeck
> Sent: Saturday, June 13, 1998 4:14 PM
> Subject: RE: GMC: Audiovox cruise control (reply to PB)
>
> Mark
>
> How did you attach the lever #250-4153 on your turn signal lever?
>
> Hermann