Anyone insulate the fuel line to the TB?

[Bob Dunahugh]

I mounted the external pumps/ filters/relay to a removable aluminum 5" by 12" plate. That will be attached to the aluminum floor cross member. I'm running a 3/8 steel line attach to the bottom side of the floor outside of the frame to the TB. So any ideas on insulating the steel line? Bob Dunahugh 78 Royale

 

[jim kanomata1]

Bob,
Bring the fuel line from the front to avoid the exhaust and do like the
Carb system.
You can do away with the insulated fuel line as it will be under pressure
and you should have a return line , so the flow will be rapid enough to
avoid heating up.

>
> I mounted the external pumps/ filters/relay to a removable aluminum 5" by
> 12" plate. That will be attached to the aluminum floor cross member. I'm
> running a 3/8 steel line attach to the bottom side of the floor outside of
> the frame to the TB. So any ideas on insulating the steel line? Bob
> Dunahugh 78 Royale
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>

--
Jim Kanomata
Applied/GMC, Newark,CA
jimk
http://www.appliedgmc.com
1-800-752-7502