Anyone installed a Reveltronics gauge panel?

[billvv]

As I was thinking about adding gauges to my coach and considering the Digi-Panel, I came across this thread:

http://gmc.mybirdfeeder.net/GMCforum/index.php?t=msg&th=37780&prevloaded=1&rid=0&start=20

that mentioned the https://www.reveltronics.com/en/products/universal-trip-computer-utcomp panel that seems to add a lot of functionality and
a reasonable price (https://www.ebay.com/itm/301690330061?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT).

and wondered if anyone here has looked at or installed one. Since I'm planning on adding EFI via the EBL (Embedded Lockers) board, it would be great
if this would connect to the injector outputs to calculate mileage. This board can do data logging, which is attractive for troubleshooting, etc.

--
Bill Van Vlack
'76 Royale; Guemes Island, Washington; Twin bed, full (DS) side bath, Brazilian Redwood counter and settee tops,455, 6KW generator; new owner a/o mid
November 2015.

 

[justin brady1]

I like that.
Very cool, I may look into that for some other purposes.
Thanks!
--
Justin Brady
http://www.thegmcrv.com/
1976 Palm Beach 455

 

[RF_Burns]

Bill,
The EBL comes with the "Whats up Display" you load on your computer. It will tell you fuel consumption, speed, injector pulse width, spark advance and
way more than you could ever ask for and will data log it all.

See here: https://www.dynamicefi.com/EBL_ScreenShots.php

Its a windoze application, but some have it running on a cheap tablet... not sure of those details.

--
Bruce Hislop
ON Canada
77PB, 455 Dick P. rebuilt, DynamicEFI EBL EFI & ESC.1 ton front end
http://www.gmcmhphotos.com/photos/showphoto.php?photo=29001
My Staff says I never listen to them, or something like that