Any idea how to fix this?

[shawn bennear]

I was looking as to how to fix this... It does push back in place, just not sure how to repair. Any thoughts? Appreciate any suggestions you may
have...Thanks

--
http://www.gmcmotorhomeworld.com

1977 Palm Beach, 403 V8 w headers.

 

[Keith V]

you may want to tell us what youre doing. there is zero context
________________________________
From: Gmclist on behalf of Shawn Bennear via Gmclist
Sent: Sunday, September 15, 2019 9:35 PM
To: gmclist
Cc: Shawn Bennear
Subject: [GMCnet] Any idea how to fix this?

I was looking as to how to fix this... It does push back in place, just not sure how to repair. Any thoughts? Appreciate any suggestions you may
have...Thanks

--
http://www.gmcmotorhomeworld.com

1977 Palm Beach, 403 V8 w headers.

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

 

[roy keen]

Ken is correct there are recommended glue for that repair. I don't remember what it is I needed to repair that same panel in my coach more then 20
years ago and it held all these years. I probable used some kind of contact cement or silicone adhesive. Jim k or Jim bounds most likely will be able
to help with the correct adhesive.
--
Roy Keen
Minden,NV
76 X Glenbrook

 

[Ken B]

Shawn,
I gave you some bad information Please read this:

http://www.gmc.mybirdfeeder.net/GMCforum/index.php?t=tree&th=31075&start=0&rid=12

--
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana

 

[6cuda6]

SikaFlex 221 will bond that back together....Plexus is another bonding agent that will work as well but it's a 2 piece mix and requires a special gun.

--
Rich Mondor,

Brockville, ON

77 Hughes 2600

 

[Rich Kinas]

Am I missing something? I never read what Shawn was trying to fix, just
that he was trying to fix something....

Rich

On Mon, Sep 16, 2019 at 5:28 AM tonka6cuda6--- via Gmclist <

> SikaFlex 221 will bond that back together....Plexus is another bonding
> agent that will work as well but it's a 2 piece mix and requires a special
> gun.
>
> --
> Rich Mondor,
>
> Brockville, ON
>
> 77 Hughes 2600
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>

 

[justin brady1]

I'd use 3M Panel Bond Adhesive, that's what it's designed for.
--
Justin Brady
http://www.thegmcrv.com/
1976 Palm Beach 455

 

[shawn bennear]

I apologize... I corrected the issue so everyone should be able to see...
--
http://www.gmcmotorhomeworld.com

1977 Palm Beach, 403 V8 w headers.

 

[Larry Davick]

http://www.gmcmotorhomeworld.com/bodyissue.jpg
http://www.gmcmotorhomeworld.com/bodyissue.jpg
--
Larry Davick
A Mystery Machine
1976(ish) Palm Beach
Fremont, Ca
Howell EFI + EBL + Electronic Dizzy

 

[sgltrac]

Separate the loose outer panel from there to the lower edge and rough up
backside of the panel and where it was bonded then apply panel bonding
adhesive in the joint and clamp in place until cured.

Sully
Bellevue wa.

On Mon, Sep 16, 2019 at 10:54 AM Larry Davick via Gmclist <

> http://www.gmcmotorhomeworld.com/bodyissue.jpg
> http://www.gmcmotorhomeworld.com/bodyissue.jpg
> --
> Larry Davick
> A Mystery Machine
> 1976(ish) Palm Beach
> Fremont, Ca
> Howell EFI + EBL + Electronic Dizzy
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>