> Looking for a replacement whip for my radio antenna. The nut is cracked and will not tighten. Also what do for ch and ham radio antennas.
Eric,
I just stood at my lathe and made a new nut. I could not find one anywhere. I used it for a while and still have it, but I made another nut and laid
a piece of SS welding rod just over the roof to the A/C housing. The thought being to change back to the OE when needed, and I just haven't needed.
We get music and traffic from the web or the GPS.
What is CH?
Be cautious of mounting a low frequency antenna on the mirror brackets as they have not real counterpoise to offer. My cell antenna does OK there,
but WL is in cM and the ground plane is part of the antenna assembly.
Matt
--
Matt & Mary Colie - '73 Glacier 23 - Members GMCMI, GMCGL, GMCES
Electronically Controlled Quiet Engine Cooling Fan
OE Rear Drum Brakes with Applied Control Arms
SE Michigan - Twixt A2 and Detroit
Eric,
I just stood at my lathe and made a new nut. I could not find one anywhere. I used it for a while and still have it, but I made another nut and laid
a piece of SS welding rod just over the roof to the A/C housing. The thought being to change back to the OE when needed, and I just haven't needed.
We get music and traffic from the web or the GPS.
What is CH?
Be cautious of mounting a low frequency antenna on the mirror brackets as they have not real counterpoise to offer. My cell antenna does OK there,
but WL is in cM and the ground plane is part of the antenna assembly.
Matt
--
Matt & Mary Colie - '73 Glacier 23 - Members GMCMI, GMCGL, GMCES
Electronically Controlled Quiet Engine Cooling Fan
OE Rear Drum Brakes with Applied Control Arms
SE Michigan - Twixt A2 and Detroit