XXXXXXXXXXXXXXXXXXXXXXXXXXX
Any chance you can drill out the centers, running out to the edge,
and them tap out?
Mike Beaton ' 77 Kingsley
still no snow here in NS......but I'm dreaming of a
white Christmas..
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
> Darren
>
> You are lucky mine have all been replaced with Phillips heads.
> Cant do a darn thing with them.
>
> Take Care
> Arch
>
> >
> > This sounds pretty ugly Scott. I feel for you buddy. This is one of the
> > problems
> > with torx head screws. The head is so strong that it will strip out the
> hole
> > before it will do what tit is supposed to. I was lucky when I did mine and
> > only
> > stripped off one head out of two sides
>
Any chance you can drill out the centers, running out to the edge,
and them tap out?
Mike Beaton ' 77 Kingsley
still no snow here in NS......but I'm dreaming of a
white Christmas..
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
> Darren
>
> You are lucky mine have all been replaced with Phillips heads.
> Cant do a darn thing with them.
>
> Take Care
> Arch
>
> >
> > This sounds pretty ugly Scott. I feel for you buddy. This is one of the
> > problems
> > with torx head screws. The head is so strong that it will strip out the
> hole
> > before it will do what tit is supposed to. I was lucky when I did mine and
> > only
> > stripped off one head out of two sides
>
