A friend just ended up getting wrong water pump from Advanced

> It was suppose to have the roller bearing by the part number. It's the ball bearing. Bob Dunahugh

That is the same problem that I had with NAPA a few years back they combined the standard duty and heavy duty one under the same part number.

If you want the HD pump, get the Cardone Select one or better yet get one from Jim K. at Applied GMC.
--
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
 
Applied is out of stock, just like everyone else.
--
Bill Van Vlack
'76 Royale; Guemes Island, Washington; Twin bed, full (DS) side bath, Brazilian Redwood counter and settee tops,455, 6KW generator; new owner a/o mid
November 2015.
 
Our parts man is telling me we have 10 on back order

On Sat, Feb 23, 2019 at 10:26 AM Bill Van Vlack via Gmclist <

> Applied is out of stock, just like everyone else.
> --
> Bill Van Vlack
> '76 Royale; Guemes Island, Washington; Twin bed, full (DS) side bath,
> Brazilian Redwood counter and settee tops,455, 6KW generator; new owner a/o
> mid
> November 2015.
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>

--
Jim Kanomata
Applied/GMC, Newark,CA
jimk
http://www.appliedgmc.com
1-800-752-7502
 
I will get hold of the Factory rep and see what he can tell us.

> Our parts man is telling me we have 10 on back order
>
> On Sat, Feb 23, 2019 at 10:26 AM Bill Van Vlack via Gmclist <

>
>> Applied is out of stock, just like everyone else.
>> --
>> Bill Van Vlack
>> '76 Royale; Guemes Island, Washington; Twin bed, full (DS) side bath,
>> Brazilian Redwood counter and settee tops,455, 6KW generator; new owner a/o
>> mid
>> November 2015.
>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>
>
>
> --
> Jim Kanomata
> Applied/GMC, Newark,CA
> jimk
> http://www.appliedgmc.com
> 1-800-752-7502
>

--
Jim Kanomata
Applied/GMC, Newark,CA
jimk
http://www.appliedgmc.com
1-800-752-7502
 
Dave,
The manufactured units do not have the special bearings that is in the unit
on back order.

On Sun, Feb 24, 2019 at 11:29 AM David H. Jarvis via Gmclist <

> Summit Racing or Rock Auto may have them.
> Remanufactured.
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>

--
Jim Kanomata
Applied/GMC, Newark,CA
jimk
http://www.appliedgmc.com
1-800-752-7502