A/C louvers

[hal stclair]

I am trying to find a pair of A/C louvers to match the ones in our 1977 Royale. The existing lower dash louvers on the drivers side can't be removed
from the original panel to fit the new one and I haven't found anything close. At least in size that is, I did find some 1-9/16" X 4-3/4" but those
are too small. Any ideas from the brain trust? Thanks all, Hal
--
1977 Royale 101348,

1977 Royale 101586, Diesel powered,

1975 Eleganza II, 101230,

1974 Eagle Bus 45',w/slideout,

Rio Rancho, NM

 

[john r. lebetski]

Used in lots of GM cars of the era. My 84 Riviera has them. Vist the junk yard
--
John Lebetski
Woodstock, IL
77 Eleganza II

 

[hal stclair]

Not much early stuff around here in yards. I found some that would 'fit' the openings from Red Dot but they aren't a match at all.
Hal
--
1977 Royale 101348,

1977 Royale 101586, Diesel powered,

1975 Eleganza II, 101230,

1974 Eagle Bus 45',w/slideout,

Rio Rancho, NM

 

[jim kanomata1]

Call our parts dept. we have them, used.

On Fri, Mar 2, 2018 at 5:42 PM, Hal StClair
wrote:

> Not much early stuff around here in yards. I found some that would 'fit'
> the openings from Red Dot but they aren't a match at all.
> Hal
> --
> 1977 Royale 101348,
>
> 1977 Royale 101586, Diesel powered,
>
> 1975 Eleganza II, 101230,
>
> 1974 Eagle Bus 45',w/slideout,
>
> Rio Rancho, NM
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>

--
Jim Kanomata
Applied/GMC, Newark,CA
jimk
http://www.appliedgmc.com
1-800-752-7502

 

[Ken H.]

Hal,

The ones I used in my new dash came from surplus stores around Elkhart.
But I think I could find some among this Google Image search:

https://goo.gl/83A8vX

Ken H.

On Fri, Mar 2, 2018 at 5:45 PM, Hal StClair
wrote:

> I am trying to find a pair of A/C louvers to match the ones in our 1977
> Royale. The existing lower dash louvers on the drivers side can't be removed
> from the original panel to fit the new one and I haven't found anything
> close. At least in size that is, I did find some 1-9/16" X 4-3/4" but those
> are too small. Any ideas from the brain trust? Thanks all, Hal
> --
>