76 Palm Beach interior

The ones on my Hughes are riveted.

> Anyone know - How are the strips fastened to ceiling that holds the liner board?

--
Rich Mondor,

Brockville, ON

77 Hughes 2600
 
The OEM GMC strips are sheet metal channels held in place with screws. The
visible trim is an inverted sheet metal channel which clips over the webs
of the concealed channel. Start at one end of the trim with a small pry
bar to get the separation started; removing the trim will then be easy, but
be careful about pulling it away very rapidly or with too much bend to
avoid damaging the trim.

At least that's how I remember my long-gone parts. (My indoor/outdoor
carpet headliner runs continuously from the cockpit plastic to the rear
bath plastic.)

Ken H.

On Thu, May 21, 2020 at 10:19 AM 6cuda6--- via Gmclist <

> The ones on my Hughes are riveted.
>

> > Anyone know - How are the strips fastened to ceiling that holds the
> liner board?
>
>
> --
> Rich Mondor,
>
> Brockville, ON
>
> 77 Hughes 2600
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
 
Samuel Ferguson:
Have you considered joining your local GMC club? Dues for the GMC 6 Wheelers is just $20.00 per year.
We generally have one rally per month - May Thru Oct.
Mike Kelley
Membership Chairman

Sent from my iPhone

>
> The ones on my Hughes are riveted.
>

>> Anyone know - How are the strips fastened to ceiling that holds the liner board?
>
>
> --
> Rich Mondor,
>
> Brockville, ON
>
> 77 Hughes 2600
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
 
Sam:
Gr8 - I will take a pic of our application and forward to you. Please give me a physical address, an e mail address, and a phone number.
You can then fill it out & send a check w/ the completed application to Ann Fippinger (our treasurer).
Looking forward to meeting you in the future.
Mike Kelley
Membership Chairman
Aka Mike/The Corvair a holic
P S Bet you can guess what I tow as a toad!

Sent from my iPhone

>
> Mike Kelly,
> Yes I have considered joining the club. Not sure how to go about registering and where to send dues to.
>
> Samuel Ferguson
> --
> Samuel Ferguson
> Pittsfield, Illinois
> (West Central Illinois)
> 1976 GMC Palm Beach (A newbie who will not allow this thing to kick my butt!!)
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
 
Sam Ferguson:
Please send me the requested info via my
e mail address: mpk10102
Thanks,
Mike/The Corvair a holic

Sent from my iPhone

>
> Mike Kelly,
> Yes I have considered joining the club. Not sure how to go about registering and where to send dues to.
>
> Samuel Ferguson
> --
> Samuel Ferguson
> Pittsfield, Illinois
> (West Central Illinois)
> 1976 GMC Palm Beach (A newbie who will not allow this thing to kick my butt!!)
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
 
Samuel F.:
👍
Mike Kelley

Sent from my iPhone

>
> Info sent via email
> Samuel Ferguson
> --
> Samuel Ferguson
> Pittsfield, Illinois
> (West Central Illinois)
> 1976 GMC Palm Beach (A newbie who will not allow this thing to kick my butt!!)
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
 
You must log in or register to reply here.
Get your shine on at www.cruzingear.co
Applied GMC

Share this page

Share this page
Top Bottom
Back