Window seals

[jim bounds1]

Dave,
Which felts are you referring to? If it is the driver/ pass. windows, it
takes 2 8' sections to do the two. There are a few important mods you need
to make to allow the slider to move freely.

If this is what you refer to, let me know and I'll go over the mods and
supply the material.

Jim Bounds
- ------------------------

>Last week I sent a msg asking for the JC Whitney Part Number for bulk
>pack seal for the cockpit windows for a non Netter.
>
>I don't recall seeing the msg and since I didn't get a single reply from
>the usually over helpful gang [g] I thought I would ask again.
>
>He wants to buy in 50' lengths as it takes 22' to do the front cockpit
>windows.
>
>Can anyone help?
>
>
> David Lee Greenberg
>GMC Motorhome Registry
> 200 MacFarlane Drive
>Delray Beach, FL 33483-6829
>
>
Jim Bounds / Co-op Motor Works Orlando www.gmccoop.com

 

[thomas g. warner]

Jim I need the material for a 1976 palmbeach also. Is it the new material or
the old wire felt?

>Dave,
>Which felts are you referring to? If it is the driver/ pass. windows, it
>takes 2 8' sections to do the two. There are a few important mods you need
>to make to allow the slider to move freely.
>
>If this is what you refer to, let me know and I'll go over the mods and
>supply the material.
>
>Jim Bounds
>------------------------

>>Last week I sent a msg asking for the JC Whitney Part Number for bulk
>>pack seal for the cockpit windows for a non Netter.
>>
>>I don't recall seeing the msg and since I didn't get a single reply from
>>the usually over helpful gang [g] I thought I would ask again.
>>
>>He wants to buy in 50' lengths as it takes 22' to do the front cockpit
>>windows.
>>
>>Can anyone help?
>>
>>
>> David Lee Greenberg
>>GMC Motorhome Registry
>> 200 MacFarlane Drive
>>Delray Beach, FL 33483-6829
>>
>>
>Jim Bounds / Co-op Motor Works Orlando www.gmccoop.com
>
>
Tom & Marg Warner
Vernon Center NY
1976 palmbeach

 

[richard guthart]

Dave,

After I saw your message I checked the JC Whitney catalogue expecting to forward
the part number to you. But there are 3 or 4 seals which look similar to the
seals for GMC's and I could not tell from the pictures which one is correct, so
I did not reply. (Last fall I got replacement seals from Jim Bounds.)

Richard

- ----- Original Message -----
From: david l greenberg
To:
Sent: Monday, April 12, 1999 8:42 PM
Subject: GMC: Window seals

> Last week I sent a msg asking for the JC Whitney Part Number for bulk
> pack seal for the cockpit windows for a non Netter.
>
> I don't recall seeing the msg and since I didn't get a single reply from
> the usually over helpful gang [g] I thought I would ask again.
>
> He wants to buy in 50' lengths as it takes 22' to do the front cockpit
> windows.
>
> Can anyone help?
>
>
> David Lee Greenberg
> GMC Motorhome Registry
> 200 MacFarlane Drive
> Delray Beach, FL 33483-6829
>

 

[bdub]

I just finished installing the new window felts from Jim. They're the new
style with no wires. Really improve the seal on the windows. He even sent
new plastic buttons and screws for the window latches too. It's a real
bargain.

>Jim I need the material for a 1976 palmbeach also. Is it the new material or
>the old wire felt?
>
>

>>Dave,
>>Which felts are you referring to? If it is the driver/ pass. windows, it
>>takes 2 8' sections to do the two. There are a few important mods you need
>>to make to allow the slider to move freely.
>>
>>If this is what you refer to, let me know and I'll go over the mods and
>>supply the material.
>>
>>Jim Bounds
>>------------------------

>>>Last week I sent a msg asking for the JC Whitney Part Number for bulk
>>>pack seal for the cockpit windows for a non Netter.
>>>
>>>I don't recall seeing the msg and since I didn't get a single reply from
>>>the usually over helpful gang [g] I thought I would ask again.
>>>
>>>He wants to buy in 50' lengths as it takes 22' to do the front cockpit
>>>windows.
>>>
>>>Can anyone help?
>>>
>>>
>>> David Lee Greenberg
>>>GMC Motorhome Registry
>>> 200 MacFarlane Drive
>>>Delray Beach, FL 33483-6829
>>>
>>>
>>Jim Bounds / Co-op Motor Works Orlando www.gmccoop.com
>>
>>
>Tom & Marg Warner
>Vernon Center NY
>1976 palmbeach
>
>

bdub
'76 Palm Beach
In The Heart o Texas
www.web-access.net/~bmassey/
icq # 202333

 

[david l greenberg]

Last week I sent a msg asking for the JC Whitney Part Number for bulk
pack seal for the cockpit windows for a non Netter.

I don't recall seeing the msg and since I didn't get a single reply from
the usually over helpful gang [g] I thought I would ask again.

He wants to buy in 50' lengths as it takes 22' to do the front cockpit
windows.

Can anyone help?

David Lee Greenberg
GMC Motorhome Registry
200 MacFarlane Drive
Delray Beach, FL 33483-6829

 

[david l greenberg]

Thanks everyone who replied. I seem to recall someone had bought a 25 or
50' spool from JC Whitney. The guy who asked me wants to buy in bulk. He
knows he can get short sections from Bounds and Sirum but he and he pals
will pool their pennies and do 2 or 3 coaches. They don't want to pay
$2.00 a foot for short lengths, I guess.


David Lee Greenberg
GMC Motorhome Registry
and Boston Homes, Inc.
800-827-9989