Wanted side markers.

[mech0001]

lol, just searched it.
PLA available in red translucent.
Pretty significant challenge for me to draft something like this
but I've done a few things in Fusion 360, so I'll put it on the
"later" list. If it comes out, I'll sell them on eBay.

 

[pvfjr]

lol, just searched it.
PLA available in red translucent.
Pretty significant challenge for me to draft something like this
but I've done a few things in Fusion 360, so I'll put it on the
"later" list. If it comes out, I'll sell them on eBay.

Look for translucent PETG. PLA not only hates water, but it really hates the sun too. Warps like crazy.

 

[mech0001]

Will do.
Thanks for the tip!

 

[gerryg]

Applied has originals for less than $100

SIDE MARKER LIGHTS ( ORIGINAL LENS )

These marker lights are available in red and amber for your GMC motorhome.

www.gmcrvparts.com

I used the ones from Applied. The 3 pieces don’t fit together very well so I sanded the edges of the coloured lens pieces until they dropped easily into the chromed plastic outer ring. Then I used superglue to glue the 3 pieces together and make them water tight. I also had to reduce the head diameter of the screws I used to attach them. It was fiddly stuff.