At the request of a GMCer who's got to pull his transmission soon, I had a
few (10) of these devices made:
http://www.gmcmhphotos.com/photos/g5741-th425-lifting-device.html
Through friendship, I got them made at a welding shop rate of about $60 per
hour and no material charge. If you can make one yourself, you can
probably do better. Otherwise, the $35 each, including USPS delivery, I
have to charge is probably better than you can do locally.
Send me an email with the subject "TH425 Lifter" if you want to order one
-- I'll make no more after the 9 are gone.
Ken H.
few (10) of these devices made:
http://www.gmcmhphotos.com/photos/g5741-th425-lifting-device.html
Through friendship, I got them made at a welding shop rate of about $60 per
hour and no material charge. If you can make one yourself, you can
probably do better. Otherwise, the $35 each, including USPS delivery, I
have to charge is probably better than you can do locally.
Send me an email with the subject "TH425 Lifter" if you want to order one
-- I'll make no more after the 9 are gone.
Ken H.
