roof ridge cap

[chris izzig]

i took all the old screws out, countersunk the holes and replaced with stainless steel screws. the ridge molding had caulking on the top of it. i scraped all that off with a piece of formica. i will put a new beed of caulking using pl 5200. i also lightly sanded the ridge molding and will spray with plasticote yellow.surprisingly enough the can i bought at pepboys matches. i also replaced all the roofrack screws with stainless ones and will put new pl5200 around them as well. any thoughts?

chris 75 gb

Join 18 million Eudora users by signing up for a free Eudora Web-Mail account at http://www.eudoramail.com

 

[david l greenberg]

On Wed, 08 Dec 1999 18:12:24 -0800 "chris izzig"
writes:
>i took all the old screws out, countersunk the holes and replaced with
>stainless steel screws. the ridge molding had caulking on the top of
>it. i scraped all that off with a piece of formica. i will put a new
>beed of caulking using pl 5200. i also lightly sanded the ridge
>molding and will spray with plasticote yellow.surprisingly enough the
>can i bought at pepboys matches. i also replaced all the roofrack
>screws with stainless ones and will put new pl5200 around them as
>well. any thoughts?
>
>chris 75 gb
>
>My thoughts? I think you are doing one heckuva job. I have the greatest
admiration for people that just go do it!

Dave Greenberg
Seasons Greetings To All!