>This no myth--my Onan bracket was broken and somebody welded it back together-
>seems to work fine on the work table
.
Mine had also been welded and broke again..
Put on a new Ragusa..
Also the Hammer trick worked well on the OhNan Flywheel..Put tension on the puller and whack the end of the bolt..Pops right off.
OhNan working great now..
CBWood
77 Kingsley
MWC OK
- -------------------------------------------------------------
Get free personalized email at http://www.switchboardmail.com
>seems to work fine on the work table
.Mine had also been welded and broke again..
Put on a new Ragusa..
Also the Hammer trick worked well on the OhNan Flywheel..Put tension on the puller and whack the end of the bolt..Pops right off.
OhNan working great now..
CBWood
77 Kingsley
MWC OK
- -------------------------------------------------------------
Get free personalized email at http://www.switchboardmail.com
