Offset bushings

[gary j zingle]

"I have also conducted my own test: I lowered the back end of mine as
low as I dared---- it drove MUCH better than when I raised it as high as =
I =

could. With the back end raised it was darn near squirrely. The conclusio=
n
I have drawn is: Our ladies are very sensitive to ride height because of
the
caster on the front wheels...................."

You got it Arch.

If I were heading out the door to buy these parts I would by the offset
ones.

In fact I may even go back in later this year and replace the perfectly
good ones with the offset ones.

Just my opinion.

Regards

Gary Zingle
1973 GMC 26 foot

 

[gene]

We had a Ca GMCer do this to no gain,,,, he felt the result was not worth
the cost.

I have 3" and 3.25 on mine with the standard. How high do you want to go ??

gene

>
>> In fact I may even go back in later this year and replace the perfectly
>> good ones with the offset ones.
>>
>
>Me too.
>
>Rick Staples
>
Genef -- 77PB/ore/ca
GMC MOTORHOME INFORMATION
mr.erf
http://www.california.com/~eagle/

 

[gene]

>Date: Thu, 11 May 2000 04:25:42 -0700
>To: gmcmotorhome
>From: gene
>Subject: Re: GMC: Offset bushings
>In-Reply-To:
>
>
>We had a Ca GMCer do this to no gain,,,, he felt the result was not worth
the cost.
>
>I have 3 and 3.25 castor on mine with the standard. How high do you want
to go ??
>
>gene
>
>

>>
>>> In fact I may even go back in later this year and replace the perfectly
>>> good ones with the offset ones.
>>>
>>
>>Me too.
>>
>>Rick Staples
>>
Genef -- 77PB/ore/ca
GMC MOTORHOME INFORMATION
mr.erf
http://www.california.com/~eagle/

 

[gary j zingle]

"We had a Ca GMCer do this to no gain,,,, he felt the
result was not worth the cost. =


I have 3" and 3.25 on mine with the standard. How
high do you want to go ??"


Cost certainly can be an issue especially with labour.
On work like this I am lucky enough to just pay for parts.

It's great that you were able to get to 3 degrees and
3.25 degrees on yours. I could only get to 1 1/2 degrees
and 2 degrees on mine.

I understand 5 degrees as the maximum.

Regards


Gary Zingle
1973 GMC 26 foot

 

[gene]

wonder what the difference is ?? why is there such a difference in what is
possible to reach ??

gene

>
>"We had a Ca GMCer do this to no gain,,,, he felt the
>result was not worth the cost.
>
>I have 3" and 3.25 on mine with the standard. How
>high do you want to go ??"
>
>
>Cost certainly can be an issue especially with labour.
>On work like this I am lucky enough to just pay for parts.
>
>It's great that you were able to get to 3 degrees and
>3.25 degrees on yours. I could only get to 1 1/2 degrees
>and 2 degrees on mine.
>
>I understand 5 degrees as the maximum.
>
>Regards
>
>
>Gary Zingle
>1973 GMC 26 foot
>
gene fisher 76 PB/OR/CA
GMC MOTORHOME INFORMATION
mr.erf
http://www.california.com/~eagle/