Migrating window

[mghamms]

I had the same problem with the same window.
The spacers are about 1/8". Two on the front side one on the top and one on the bottom. They just keep the space even and are not that fussy.
I used a butal rubber sealant in a caulk gun and suction cups from flee bay.
--
1977 Kingsley 455 as stock as it gets except lots of Ragusa parts

 

[Carl Stouffer]

Once you get the window back in the right place, carefully )so as not to hit the glass) drill and pop rivet the vertical bar in place so it doesn't
happen again.

--
Carl Stouffer
'75 ex Palm Beach
Tucson, AZ.
Chuck Aulgur Reaction Arm Disc Brakes, Quadrabags, 3.70 LSD final drive, Lenzi knuckles/hubs, Dodge Truck 16" X 8" front wheels, Rear American Eagles,
Solar battery charging. GMCSJ and GMCMI member

 

[mghamms]

> Once you get the window back in the right place, carefully )so as not to hit the glass) drill and pop rivet the vertical bar in place so it
> doesn't happen again.

Yea forgot I did that also.

--
1977 Kingsley 455 as stock as it gets except lots of Ragusa parts