Microlevel is ready

[johnny]

Kieth - thanks, I just would wanna be covered in the event support goes away before the system does.
Jim H, a counter - offer. Brought yourself to Bean Station first weekend in may. Fly into Atlanta for cheap if you don't wanna drive your coach.
There's a nice cheap Air BnB room about three miles down the road. We can get you there from the airport and back.

--johnny

--
76 26' Eleganza(?) with beaucoup mods and add - ons.
Braselton, Ga.
"I forgive them all, save those who hurt the dogs. They must answer to me in hell" - ol Andy, paraphrased

 

[Rob]

I'm so inclined - what's the URL?

I actually started putting the parts together for a simple height measurement system to go with my Airlift Wireless Air system (using a Raspberry Pi and some waterproof ultrasonic sensors).

I don't really need an "automatic" system - but I've been watching your updates for a while and I'm intrigued.

Thanks (and nice work!).

Rob
Victoria, BC
76 Royale - Rear Twins/Dry Bath

>
> The code is all up on a public VCS if you're so inclined.
>
>
> ________________________________
> From: Gmclist on behalf of Johnny Bridges via Gmclist
> Sent: Tuesday, February 20, 2018 9:50 AM
> To: gmclist
> Cc: Johnny Bridges
> Subject: Re: [GMCnet] Microlevel is ready
>
> Kieth, will you supply the source code, or at least escrow it? I plan to outlive everybody here, and thus might need it after you assume room
> temperature
>
> --johnny
> --
> 76 26' Eleganza(?) with beaucoup mods and add - ons.
> Braselton, Ga.
> "I forgive them all, save those who hurt the dogs. They must answer to me in hell" - ol Andy, paraphrased

 

[Keith V]

Rob,
Yes I remember you talking about that. I started with an Arduino, there's not a lot of processing power needed!

Links and details in the first message or ...

Here's the sales brochure
http://www.gmcmotorhomemarketplace.com/vasilakes/microlevel_intro.pdf

Users manual
http://www.gmcmotorhomemarketplace.com/vasilakes/microlevel_install-operation.pdf

Wiring diagram
http://www.gmcmotorhomemarketplace.com/vasilakes/microlevel_wiring.jpg
________________________________
From: Gmclist on behalf of Rob
Sent: Tuesday, February 20, 2018 1:45 PM
To: gmclist
Subject: Re: [GMCnet] Microlevel is ready

I'm so inclined - what's the URL?

I actually started putting the parts together for a simple height measurement system to go with my Airlift Wireless Air system (using a Raspberry Pi and some waterproof ultrasonic sensors).

I don't really need an "automatic" system - but I've been watching your updates for a while and I'm intrigued.

Thanks (and nice work!).

Rob
Victoria, BC
76 Royale - Rear Twins/Dry Bath

>
> The code is all up on a public VCS if you're so inclined.
>
>
> ________________________________
> From: Gmclist on behalf of Johnny Bridges via Gmclist
> Sent: Tuesday, February 20, 2018 9:50 AM
> To: gmclist
> Cc: Johnny Bridges
> Subject: Re: [GMCnet] Microlevel is ready
>
> Kieth, will you supply the source code, or at least escrow it? I plan to outlive everybody here, and thus might need it after you assume room
> temperature
>
> --johnny
> --
> 76 26' Eleganza(?) with beaucoup mods and add - ons.
> Braselton, Ga.
> "I forgive them all, save those who hurt the dogs. They must answer to me in hell" - ol Andy, paraphrased
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

 

[Rob]

Thanks - yes, I saw those links. But was curious about your source code URL.

I'll likely write my (very simple) code in Python. I should get busy and just do it...

Rob
Victoria, BC
76 Royale - Rear Twins/Dry Bath

>
> Rob,
> Yes I remember you talking about that. I started with an Arduino, there's not a lot of processing power needed!
>
> Links and details in the first message or ...
>
> Here's the sales brochure
> http://www.gmcmotorhomemarketplace.com/vasilakes/microlevel_intro.pdf
>
> Users manual
> http://www.gmcmotorhomemarketplace.com/vasilakes/microlevel_install-operation.pdf
>
> Wiring diagram
> http://www.gmcmotorhomemarketplace.com/vasilakes/microlevel_wiring.jpg