Installing a Onan emerald1

[dan1]

I have a Onan Emerald 1 genset I want to install. Came from an RV that we had that burned down. The PO of my GMC removed everything. Trying to figure
out how to mount this genset. The plate its sitting on is 28" wide and then it has slides that adds another 3" to that width. The opening is only 24"
in my GMC. Has anyone installed this genset and just curious how they mounted it.
--
1976 Palm Beach 26'

 

[jim kanomata1]

​Go to ONAN site and download the installation book.
Were a Onan dealer and we do that frequently.​

> I have a Onan Emerald 1 genset I want to install. Came from an RV that we
> had that burned down. The PO of my GMC removed everything. Trying to figure
> out how to mount this genset. The plate its sitting on is 28" wide and
> then it has slides that adds another 3" to that width. The opening is only
> 24"
> in my GMC. Has anyone installed this genset and just curious how they
> mounted it.
> --
> 1976 Palm Beach 26'
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>

--
Jim Kanomata
Applied/GMC, Newark,CA
jimk
http://www.appliedgmc.com
1-800-752-7502

 

[Keith V]

My Royale has an Onan Emerald in it. Put in by the PO,

It's a tight fit depth wise but there is 8-10 inches in with left

The PO did rebuild the entire interior however, so it's not stock, not even Coachman stock

________________________________
From: Gmclist on behalf of Jim Kanomata
Sent: Tuesday, June 20, 2017 10:27:10 PM
To: gmclist
Subject: Re: [GMCnet] Installing a Onan emerald1

​Go to ONAN site and download the installation book.
Were a Onan dealer and we do that frequently.​

> I have a Onan Emerald 1 genset I want to install. Came from an RV that we
> had that burned down. The PO of my GMC removed everything. Trying to figure
> out how to mount this genset. The plate its sitting on is 28" wide and
> then it has slides that adds another 3" to that width. The opening is only
> 24"
> in my GMC. Has anyone installed this genset and just curious how they
> mounted it.
> --
> 1976 Palm Beach 26'
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>

--
Jim Kanomata
Applied/GMC, Newark,CA
jimk
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org