Inner diameter Onan fuel line

[peer oliver schmidt]

Anyone know the inner diameter of the Onan fuel line? I want to "splice"
the connection to my heater into the Onan line, and want to have all the
pieces in place before cutting things.

Thanks.
--
Best regards

Peer Oliver Schmidt
PGP Key ID: 0x83E1C2EA

'76a Eleganza II 26', VA
'73 Sequoia 23', Germany, SH

 

[Matt Colie]

> Anyone know the inner diameter of the Onan fuel line? I want to "splice"
> the connection to my heater into the Onan line, and want to have all the
> pieces in place before cutting things.
>
> Thanks.
> --
> Best regards
>
> Peer Oliver Schmidt
> PGP Key ID: 0x83E1C2EA
>
> '76a Eleganza II 26', VA
> '73 Sequoia 23', Germany, SH

Peer,

When I replaced all of mine both metal and rubber, all of it was 1/4" nominal. So, the metal was 1/4 OD and the rubber 1/4 ID.
I hope this helps.

Matt
--
Matt & Mary Colie - '73 Glacier 23 - Members GMCMI, GMCGL, GMCES
Electronically Controlled Quiet Engine Cooling Fan
OE Rear Drum Brakes with Applied Control Arms
SE Michigan - Twixt A2 and Detroit

 

[peer oliver schmidt]

Thanks a bunch. That means a 5mm T piece should be good with a bit of additional tape around it.
--
Best regards

Peer Oliver Schmidt
'76a Eleganza II, VA
'73 Sequoia, Germany

 

[Tom Pryor]

Iv'e got my tanks exposed. The generator hose is 5/16". All other hoses
are 3/8". FWIW
--
Regards,

Tom Pryor
4188 Limerick Dr
Lake Wales, Fl 33859
Cell 248 470 9186

Living on a waterfront is not a matter of life or death. Its more
important than that.