GMC being parted out

[tmsnyder]

Not mine, but I'm looking for a 'G' from the front and found this:

A 1976 GMC Eleganza II Motorhome for pieces and parts....

The Engine and Trans has 57,700 Original Miles, Starts and Runs Good, Great Oil Pressure, Exhaust open and Noisy. Sold the 6,000 W Onan Generator, Has
Good Windows, Gen door, Cockpit seats, Bumpers, bumper shocks, Gas Tanks, So many Good GMC Parts, GMC Air bag system pump, reservoir, and air bag
controls valves, new from Cinnabar with receipts, Few Miles if any, good Chassis for parts.

Text with your needs and will see if we have....

Pete @ 301-335-6869

When all done parting out, it has a good engine and trans with 57,700 Miles
--
Todd Snyder, Buffalo NY
1976 Eleganza II

 

[d c *mac* macdonald]

Sure wish that engine and tranny were a whole lot closer to Oklahoma City!

D C "Mac" Macdonald​
Amateur Radio K2GKK​
Since 30 November '53​
USAF and FAA, Retired​
Member GMCMI & Classics​
Oklahoma City, OK​
"The Money Pit"​
TZE166V101966

________________________________
From: Gmclist on behalf of Todd Snyder via Gmclist
Sent: Tuesday, July 9, 2019 16:09
To: gmclist
Cc: Todd Snyder
Subject: [GMCnet] GMC being parted out

Not mine, but I'm looking for a 'G' from the front and found this:

A 1976 GMC Eleganza II Motorhome for pieces and parts....

The Engine and Trans has 57,700 Original Miles, Starts and Runs Good, Great Oil Pressure, Exhaust open and Noisy. Sold the 6,000 W Onan Generator, Has
Good Windows, Gen door, Cockpit seats, Bumpers, bumper shocks, Gas Tanks, So many Good GMC Parts, GMC Air bag system pump, reservoir, and air bag
controls valves, new from Cinnabar with receipts, Few Miles if any, good Chassis for parts.

Text with your needs and will see if we have....

Pete @ 301-335-6869

When all done parting out, it has a good engine and trans with 57,700 Miles
--
Todd Snyder, Buffalo NY
1976 Eleganza II

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

 

[tmsnyder]

If it were me, I'd see if I could pay him to strap it to a pallet and drop it off at a Fastenal location to ship it to a Fastenal near me, and then
pick it up locally. And I'm a lot closer.
--
Todd Snyder, Buffalo NY
1976 Eleganza II

 

[Ken H.]

Fastenal? Do they do such shipping? At what sort of rates?

Ken H.

On Tue, Jul 9, 2019 at 8:22 PM Todd Snyder via Gmclist <

> If it were me, I'd see if I could pay him to strap it to a pallet and drop
> it off at a Fastenal location to ship it to a Fastenal near me, and then
> pick it up locally. And I'm a lot closer.
> --
> Todd Snyder, Buffalo NY
> 1976 Eleganza II
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>

 

[sgltrac]

Ken, right?

Sully
Bellevue wa

On Tue, Jul 9, 2019 at 6:17 PM Ken Henderson via Gmclist <

> Fastenal? Do they do such shipping? At what sort of rates?
>
> Ken H.
>
> On Tue, Jul 9, 2019 at 8:22 PM Todd Snyder via Gmclist <

>
> > If it were me, I'd see if I could pay him to strap it to a pallet and
> drop
> > it off at a Fastenal location to ship it to a Fastenal near me, and then
> > pick it up locally. And I'm a lot closer.
> > --
> > Todd Snyder, Buffalo NY
> > 1976 Eleganza II
> >
> > _______________________________________________
> > GMCnet mailing list
> > Unsubscribe or Change List Options:
> > http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
> >
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>

 

[Ken B]

We use Fastenal frequently to ship large or heavy items. The deal is they ship store to store. You have to deliver the item to the store ad have
someone pick it up on the other end.

We ship a lot of airplane engines that way. It is very convenient for us because you can see the Fastenal store about 1 block away from the back of
the hangar.
--
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana

 

[Randy Hecht]

Sorry to change subject, but since I noticed your an A&P as you mentioned aircraft engines, I am assuming here. Would Pro Seal work for sealing the seams on a GMC? I recall that it is quite good a sealing from the way we used it on helicopters.

Chaplain Randy Hecht
Roswell, GA
Chaplains are ready to Listen when you're ready to talk.

1974 Canyon Lakes GMC the Unicorn Express
80mm Front Disc and a work in progress

>
> We use Fastenal frequently to ship large or heavy items. The deal is they ship store to store. You have to deliver the item to the store ad have
> someone pick it up on the other end.
>
> We ship a lot of airplane engines that way. It is very convenient for us because you can see the Fastenal store about 1 block away from the back of
> the hangar.
> --
> Ken Burton - N9KB
> 76 Palm Beach
> Hebron, Indiana
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

 

[Ken H.]

Thanks, Ken. I never knew they did that. We've got a Cad500+TH425 to ship
soon; we'll have to look into that option.

Ken H.

On Wed, Jul 10, 2019 at 1:02 AM Ken Burton via Gmclist <

> We use Fastenal frequently to ship large or heavy items. The deal is
> they ship store to store. You have to deliver the item to the store ad have
> someone pick it up on the other end.
>
> We ship a lot of airplane engines that way. It is very convenient for us
> because you can see the Fastenal store about 1 block away from the back of
> the hangar.
> --
> Ken Burton - N9KB
> 76 Palm Beach
> Hebron, Indiana
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>

 

[powwerjon]

For those of you that are interested on Fastenal Shipping you can look here:

https://www.fastenal.com/en/22/3pl-third-party-logistics

Thanks Ken!

J.R. Wright
GMC GreatLaker
TZE Zone Restorations
78 GMC Buskirk 30’ Stretch
1975 GMC Avion (Under Reconstruction)
Michigan

>
> We use Fastenal frequently to ship large or heavy items. The deal is they ship store to store. You have to deliver the item to the store ad have
> someone pick it up on the other end.
>
> We ship a lot of airplane engines that way. It is very convenient for us because you can see the Fastenal store about 1 block away from the back of
> the hangar.
> --
> Ken Burton - N9KB
> 76 Palm Beach
> Hebron, Indiana

 

[tmsnyder]

Fastenal to Fastenal shipping, on a pallet, is about the cheapest way to go for heavy items. You have to be willing to drop off at the store, and the
buyer has to pick up at the store.

I ship by Greyhound items that are big and bulky, waaaaaaay cheaper than FedEx, UPS etc. but again, you have to have a buyer willing to pick up at
Greyhound. Recently sold a cello to a woman in Denver and Greyhound was the best way to do it, I could afford to package the cello so it woundn't be
damaged in a huge box and it was still only about $30 to ship it across the country.
--
Todd Snyder, Buffalo NY
1976 Eleganza II