Glove Box Latch

Sir: I should have, can let you know tomorrow. Pm me an address and I'll drop it in an envelope. Any stuff else?

> Anybody have an inner glove box latch they are willing to part with?
>
> Or know another vehicle that has the same mechanism?
>
> This is basically the last piece of the puzzle

--
C. Boyd
76 Crestmont
East Tennessee
 
Charles, would you happen to have a internal wiper arm assembly. My
passenger side arm broke off from a wet heavy snow fall.

On Sun, Jun 25, 2017 at 7:05 PM, Charles Boyd
wrote:

> Sir: I should have, can let you know tomorrow. Pm me an address and I'll
> drop it in an envelope. Any stuff else?
>
>
>
>
>
>

> > Anybody have an inner glove box latch they are willing to part with?
> >
> > Or know another vehicle that has the same mechanism?
> >
> > This is basically the last piece of the puzzle
>
>
> --
> C. Boyd
> 76 Crestmont
> East Tennessee
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>

--
Bruce Hart
1976 Palm Beach
Milliken, Co
GMC=Got More Class
 
Sir: I should have. I'll look and check it out.

> Charles, would you happen to have a internal wiper arm assembly. My
> passenger side arm broke off from a wet heavy snow fall.
>
> On Sun, Jun 25, 2017 at 7:05 PM, Charles Boyd

>
> > Sir: I should have, can let you know tomorrow. Pm me an address and I'll
> > drop it in an envelope. Any stuff else?
> >
> >
> >
> >
> >
> >

> >> Anybody have an inner glove box latch they are willing to part with?
> >>
> >> Or know another vehicle that has the same mechanism?
> >>
> >> This is basically the last piece of the puzzle
> >
> >
> > --
> > C. Boyd
> > 76 Crestmont
> > East Tennessee
> >
> > _______________________________________________
> > GMCnet mailing list
> > Unsubscribe or Change List Options:
> > http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
> >
>
>
>
> --
> Bruce Hart
> 1976 Palm Beach
> Milliken, Co
> GMC=Got More Class
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

--
C. Boyd
76 Crestmont
East Tennessee
 
Great!

On Mon, Jun 26, 2017 at 4:55 AM, Charles Boyd
wrote:

> Sir: I should have. I'll look and check it out.
>
>
>

> > Charles, would you happen to have a internal wiper arm assembly. My
> > passenger side arm broke off from a wet heavy snow fall.
> >
> > On Sun, Jun 25, 2017 at 7:05 PM, Charles Boyd

> >
> > > Sir: I should have, can let you know tomorrow. Pm me an address and
> I'll
> > > drop it in an envelope. Any stuff else?
> > >
> > >
> > >
> > >
> > >
> > >

> > >> Anybody have an inner glove box latch they are willing to part with?
> > >>
> > >> Or know another vehicle that has the same mechanism?
> > >>
> > >> This is basically the last piece of the puzzle
> > >
> > >
> > > --
> > > C. Boyd
> > > 76 Crestmont
> > > East Tennessee
> > >
> > > _______________________________________________
> > > GMCnet mailing list
> > > Unsubscribe or Change List Options:
> > > http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
> > >
> >
> >
> >
> > --
> > Bruce Hart
> > 1976 Palm Beach
> > Milliken, Co
> > GMC=Got More Class
> > _______________________________________________
> > GMCnet mailing list
> > Unsubscribe or Change List Options:
> > http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
>
> --
> C. Boyd
> 76 Crestmont
> East Tennessee
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>

--
Bruce Hart
1976 Palm Beach
Milliken, Co
GMC=Got More Class
 
Justin: latch catch in hand will send in tomorrow's mail.

Bruce: passenger side only in hand. Is your address in International registry ? Can send tomorrow also.
--
C. Boyd
76 Crestmont
East Tennessee
 
Charles, that would be great
Bruce hart
2182 Birdie Dr.
Milliken, Co 80543

Are you in need of anything for your coach? I do have a few left over
parts from a 1973 Canyonland! I have an assortment of engine brackets,
toll window catch, speed o- cable wiper cable, homemade grease zerks for
the bogies, alternator tension device, stainless steal washers for wiper
blade modification.
Let me know how much with shipping?

On Mon, Jun 26, 2017 at 9:20 AM, Charles Boyd
wrote:

> Justin: latch catch in hand will send in tomorrow's mail.
>
> Bruce: passenger side only in hand. Is your address in International
> registry ? Can send tomorrow also.
> --
> C. Boyd
> 76 Crestmont
> East Tennessee
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>

--
Bruce Hart
1976 Palm Beach
Milliken, Co
GMC=Got More Class
 
I could use the grease zerks. Are they different from a 76? I thought a 73 was a single hole pin? Even trade?

> Charles, that would be great
> Bruce hart
> 2182 Birdie Dr.
> Milliken, Co 80543
>
>
> Are you in need of anything for your coach? I do have a few left over
> parts from a 1973 Canyonland! I have an assortment of engine brackets,
> toll window catch, speed o- cable wiper cable, homemade grease zerks for
> the bogies, alternator tension device, stainless steal washers for wiper
> blade modification.
> Let me know how much with shipping?
>
> On Mon, Jun 26, 2017 at 9:20 AM, Charles Boyd

>
> > Justin: latch catch in hand will send in tomorrow's mail.
> >
> > Bruce: passenger side only in hand. Is your address in International
> > registry ? Can send tomorrow also.
> > --
> > C. Boyd
> > 76 Crestmont
> > East Tennessee
> >
> > _______________________________________________
> > GMCnet mailing list
> > Unsubscribe or Change List Options:
> > http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
> >
>
>
>
> --
> Bruce Hart
> 1976 Palm Beach
> Milliken, Co
> GMC=Got More Class
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

--
C. Boyd
76 Crestmont
East Tennessee
 
These are modified to grease to back hole of the pin for the 76.

http://www.gmcmhphotos.com/photos/bogie-greaser-mod-3/p6896.html

You would remove the single grease zerk, remove old grease in pin with a
straw, and insert new double grease zerks.

On Mon, Jun 26, 2017 at 7:55 PM, Charles Boyd
wrote:

> I could use the grease zerks. Are they different from a 76? I thought a
> 73 was a single hole pin? Even trade?
>

> > Charles, that would be great
> > Bruce hart
> > 2182 Birdie Dr.
> > Milliken, Co 80543
> >
> >
> > Are you in need of anything for your coach? I do have a few left over
> > parts from a 1973 Canyonland! I have an assortment of engine brackets,
> > toll window catch, speed o- cable wiper cable, homemade grease zerks for
> > the bogies, alternator tension device, stainless steal washers for wiper
> > blade modification.
> > Let me know how much with shipping?
> >
> > On Mon, Jun 26, 2017 at 9:20 AM, Charles Boyd

> >
> > > Justin: latch catch in hand will send in tomorrow's mail.
> > >
> > > Bruce: passenger side only in hand. Is your address in International
> > > registry ? Can send tomorrow also.
> > > --
> > > C. Boyd
> > > 76 Crestmont
> > > East Tennessee
> > >
> > > _______________________________________________
> > > GMCnet mailing list
> > > Unsubscribe or Change List Options:
> > > http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
> > >
> >
> >
> >
> > --
> > Bruce Hart
> > 1976 Palm Beach
> > Milliken, Co
> > GMC=Got More Class
> > _______________________________________________
> > GMCnet mailing list
> > Unsubscribe or Change List Options:
> > http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
>
> --
> C. Boyd
> 76 Crestmont
> East Tennessee
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>

--
Bruce Hart
1976 Palm Beach
Milliken, Co
GMC=Got More Class
 
I have installed some for other owners. I don't have a set for our new 76 Eleganza staff car. Did you get the pm I sent you with FedEx tracking #?

> These are modified to grease to back hole of the pin for the 76.
>
> http://www.gmcmhphotos.com/photos/bogie-greaser-mod-3/p6896.html
>
> You would remove the single grease zerk, remove old grease in pin with a
> straw, and insert new double grease zerks.
>
> On Mon, Jun 26, 2017 at 7:55 PM, Charles Boyd

>
> > I could use the grease zerks. Are they different from a 76? I thought a
> > 73 was a single hole pin? Even trade?
> >

> >> Charles, that would be great
> >> Bruce hart
> >> 2182 Birdie Dr.
> >> Milliken, Co 80543
> >>
> >>
> >> Are you in need of anything for your coach? I do have a few left over
> >> parts from a 1973 Canyonland! I have an assortment of engine brackets,
> >> toll window catch, speed o- cable wiper cable, homemade grease zerks for
> >> the bogies, alternator tension device, stainless steal washers for wiper
> >> blade modification.
> >> Let me know how much with shipping?
> >>
> >> On Mon, Jun 26, 2017 at 9:20 AM, Charles Boyd

> >>
> >>> Justin: latch catch in hand will send in tomorrow's mail.
> >>>
> >>> Bruce: passenger side only in hand. Is your address in International
> >>> registry ? Can send tomorrow also.
> >>> --
> >>> C. Boyd
> >>> 76 Crestmont
> >>> East Tennessee
> >>>
> >>> _______________________________________________
> >>> GMCnet mailing list
> >>> Unsubscribe or Change List Options:
> >>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
> >>>
> >>
> >>
> >>
> >> --
> >> Bruce Hart
> >> 1976 Palm Beach
> >> Milliken, Co
> >> GMC=Got More Class
> >> _______________________________________________
> >> GMCnet mailing list
> >> Unsubscribe or Change List Options:
> >> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
> >
> >
> > --
> > C. Boyd
> > 76 Crestmont
> > East Tennessee
> >
> > _______________________________________________
> > GMCnet mailing list
> > Unsubscribe or Change List Options:
> > http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
> >
>
>
>
> --
> Bruce Hart
> 1976 Palm Beach
> Milliken, Co
> GMC=Got More Class
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

--
C. Boyd
76 Crestmont
East Tennessee
 
Got it. Replied to PM

On Tue, Jun 27, 2017 at 4:44 AM, Charles Boyd
wrote:

> I have installed some for other owners. I don't have a set for our new 76
> Eleganza staff car. Did you get the pm I sent you with FedEx tracking #?
>
>
>

> > These are modified to grease to back hole of the pin for the 76.
> >
> > http://www.gmcmhphotos.com/photos/bogie-greaser-mod-3/p6896.html
> >
> > You would remove the single grease zerk, remove old grease in pin with a
> > straw, and insert new double grease zerks.
> >
> > On Mon, Jun 26, 2017 at 7:55 PM, Charles Boyd

> >
> > > I could use the grease zerks. Are they different from a 76? I
> thought a
> > > 73 was a single hole pin? Even trade?
> > >

> > >> Charles, that would be great
> > >> Bruce hart
> > >> 2182 Birdie Dr.
> > >> Milliken, Co 80543
> > >>
> > >>
> > >> Are you in need of anything for your coach? I do have a few left
> over
> > >> parts from a 1973 Canyonland! I have an assortment of engine
> brackets,
> > >> toll window catch, speed o- cable wiper cable, homemade grease zerks
> for
> > >> the bogies, alternator tension device, stainless steal washers for
> wiper
> > >> blade modification.
> > >> Let me know how much with shipping?
> > >>
> > >> On Mon, Jun 26, 2017 at 9:20 AM, Charles Boyd

> > >>
> > >>> Justin: latch catch in hand will send in tomorrow's mail.
> > >>>
> > >>> Bruce: passenger side only in hand. Is your address in
> International
> > >>> registry ? Can send tomorrow also.
> > >>> --
> > >>> C. Boyd
> > >>> 76 Crestmont
> > >>> East Tennessee
> > >>>
> > >>> _______________________________________________
> > >>> GMCnet mailing list
> > >>> Unsubscribe or Change List Options:
> > >>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
> > >>>
> > >>
> > >>
> > >>
> > >> --
> > >> Bruce Hart
> > >> 1976 Palm Beach
> > >> Milliken, Co
> > >> GMC=Got More Class
> > >> _______________________________________________
> > >> GMCnet mailing list
> > >> Unsubscribe or Change List Options:
> > >> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
> > >
> > >
> > > --
> > > C. Boyd
> > > 76 Crestmont
> > > East Tennessee
> > >
> > > _______________________________________________
> > > GMCnet mailing list
> > > Unsubscribe or Change List Options:
> > > http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
> > >
> >
> >
> >
> > --
> > Bruce Hart
> > 1976 Palm Beach
> > Milliken, Co
> > GMC=Got More Class
> > _______________________________________________
> > GMCnet mailing list
> > Unsubscribe or Change List Options:
> > http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
>
> --
> C. Boyd
> 76 Crestmont
> East Tennessee
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>

--
Bruce Hart
1976 Palm Beach
Milliken, Co
GMC=Got More Class
 
> I could use the grease zerks. Are they different from a 76? I thought a 73 was a single hole pin? Even trade?

Chuck,

The holes for the grease passages in a 73 are different than later models. The cavities for each side are not joined. You can not use the greasers
that people install on the later models because the hole down the center dead ends.

If you devise a way to drill through that dead end, you could make the greasers work.

At one time I had a short discussion here on the forum with Jim K about that. He was going to look into drilling the pins he sells for the early model
GMCs. If he did/does that, the bogie greasers will work on the pin sets he sells.
 
You must log in or register to reply here.
Get your shine on at www.cruzingear.co
Applied GMC

Share this page

Share this page
Top Bottom
Back