Genset doesn't fire up anymore

[heinz wittenbecher]

As with most ladies, just when one thinks he knows her, whammmo.

Was just adjusting idle, etc and all was running well. I stopped it to make
some final adjust and when the start switch is pressed it's just an awful
silence.

I have power at the solenoid. I have not 'jumpered' it yet. Had cleaned
terminals, starter solenoid etc when I installed a new ring gear. Not even
so much as a click right now.

I'm suspecting the little control panel may be the culprit but I thought I'd
check here first in case I missed something.

TIA - Heinz

 

[thomas g. warner]

Jumpering the solenoid is the quickest way to find out. If it still does not
work starter (especially if you have headers)

>As with most ladies, just when one thinks he knows her, whammmo.
>
>Was just adjusting idle, etc and all was running well. I stopped it to make
>some final adjust and when the start switch is pressed it's just an awful
>silence.
>
>I have power at the solenoid. I have not 'jumpered' it yet. Had cleaned
>terminals, starter solenoid etc when I installed a new ring gear. Not even
>so much as a click right now.
>
>I'm suspecting the little control panel may be the culprit but I thought I'd
>check here first in case I missed something.
>
>TIA - Heinz
>
>
>
>