Fuel line needed

[bryan strickland]

I need a fuel line from my fuel pump to the carb. I think I can make one
but I do think I read on the list that cinnarbar sold a braided one. Can I
make one out of tubing and guest flare both ends?
Thanks Bryan from N.J.

 

[antnip]

I did!

Tony B.

- ----- Original Message -----
From: Bryan & Becky
To: GMC Motorhome Digest
Sent: Saturday, April 08, 2000 7:13 PM
Subject: GMC: Fuel line needed

> I need a fuel line from my fuel pump to the carb. I think I can make one
> but I do think I read on the list that cinnarbar sold a braided one. Can
I
> make one out of tubing and guest flare both ends?
> Thanks Bryan from N.J.
>
>
>

 

[donald w. ogden]

Me too !!!
I got a 20" steel line from Discount Auto. It comes already flared on each end
with nuts installed. Use a good tube bender (3/8") and it should take about two
hours to get it right. Take it slow; one little bend at a time.
Don
- -----Original Message-----
From: Tony Bad
To: gmcmotorhome
Date: Saturday, April 08, 2000 7:23 PM
Subject: Re: GMC: Fuel line needed

>I did!
>
>Tony B.
>
>----- Original Message -----
>From: Bryan & Becky
>To: GMC Motorhome Digest
>Sent: Saturday, April 08, 2000 7:13 PM
>Subject: GMC: Fuel line needed
>
>
>> I need a fuel line from my fuel pump to the carb. I think I can make one
>> but I do think I read on the list that cinnarbar sold a braided one. Can
>I
>> make one out of tubing and guest flare both ends?
>> Thanks Bryan from N.J.
>>
>>
>>
>

 

[john wright]

You can order the fuel tube PN# 724950 from Cinnabar and the cost is
$21.95. Call 1-800-720-2227.

- --
J.R. Wright
GMC GreatLakers
77 Eleganza II
Michigan

>
> I need a fuel line from my fuel pump to the carb. I think I can make one
> but I do think I read on the list that cinnarbar sold a braided one. Can I
> make one out of tubing and guest flare both ends?
> Thanks Bryan from N.J.