Front Motor Mount needed / Timing Chain in progress

[heinz wittenbecher]

Hi folks,

old timing chain is out.

While at it I'd like to change the front motormount... the rubber cushion
piece. (455).

It's not drastic, but if I can get it locally today I'd change it. The
problem of course is that GM doesn't stock it anymore so I'm wondering if
there is a cross to someone/something else.

TIA - Heinz

P.S. will report on the TC change later... sofar so good

 

[heinz wittenbecher]

Thanks Scott.

I was hoping that there might be a straight cross from the GM parts book.

I got all my other parts in so I'm going to go with the old one. The main
rubber itself still looks good, just the edges that got kinda battered from
age and oil.

Hopefully all the parts will be the right ones

Heinz

- ----- Original Message -----
From:
To:
Sent: Wednesday, May 12, 1999 1:10 PM
Subject: Re: GMC: Front Motor Mount needed / Timing Chain in progress

> In a message dated 5/12/99 3:55:04 PM Eastern Daylight Time,

>
> > The
> > problem of course is that GM doesn't stock it anymore so I'm wondering
if
> > there is a cross to someone/something else.
>
> Hi Heinz!
>
> I do know that NAPA offers numerous engine mounts. They have a section in
> there parts manuals on engine mounts. At least it is a place to look. I
will
> look at my mount to see what it looks like and check NAPAS section on
mounts.
> If you can get me some dimensions of studs, holes, thickness etc from
what
> you have I will look through their NAPA book!
>
> Scott HREF="http://members.aol.com/gmcgrlk/club/index.htm">Adohen Scott
> Nehoda (Odds and Ends site)
>
>
>