How I mounted dual oil pressure sensors. The second sensor for Digipanel.
I had seen several different installations, but both looked unweildy. I used the T fitting shown and fastened both sensors as shown in the photo. The
original dash sensor is smaller so I mounted it horizontal through the horse collar bracket.
http://www.gmcmhphotos.com/photos/misc/p63221-mounting-dual-oil-pressure-sendors.html
Bend the electrical tab back on the forward facing sensor to lessen damage in case a belt breaks. I made sure neither sensor would rub on anything.
http://www.gmcmhphotos.com/photos/misc/p63220-mounting-dual-oil-pressure-sendors.html
Just what I did.
--
Bruce Hislop
ON Canada
77PB, 455 Dick P. rebuilt, DynamicEFI EBL EFI & ESC.
Hubler 1 ton front end
http://www.gmcmhphotos.com/photos/showphoto.php?photo=29001
My Staff says I never listen to them, or something like that
I had seen several different installations, but both looked unweildy. I used the T fitting shown and fastened both sensors as shown in the photo. The
original dash sensor is smaller so I mounted it horizontal through the horse collar bracket.
http://www.gmcmhphotos.com/photos/misc/p63221-mounting-dual-oil-pressure-sendors.html
Bend the electrical tab back on the forward facing sensor to lessen damage in case a belt breaks. I made sure neither sensor would rub on anything.
http://www.gmcmhphotos.com/photos/misc/p63220-mounting-dual-oil-pressure-sendors.html
Just what I did.
--
Bruce Hislop
ON Canada
77PB, 455 Dick P. rebuilt, DynamicEFI EBL EFI & ESC.
Hubler 1 ton front end
http://www.gmcmhphotos.com/photos/showphoto.php?photo=29001
My Staff says I never listen to them, or something like that
