I went out on a salvage yard "safari" yesterday. Picked up a good HEI
distributor and an extra coil and cap. I was eluded by the main object
of my search - 76 to 78 Eldorado rear disc brake hardware. The rotors
and backing plates can be modified to fit the GMC. Found two first
generation Eldos - both with complete drivetrains for anyone that wants
to do a 500 Caddy conversion(not me!). One was a nearly complete
convertible. Also found a bunch of third generation cars.
My question is - does anyone know if the backing plates and calipers
were the same on the third gen Eldos? I know the rotors are thinner,
but I'm thinking they may be the same diameter. Sure, I could just send
TSM $560 for their backing plates and rotors, but where would the
challenge be in that!?
)
Patrick
- --
Patrick Flowers
Mailto
atri63
The GMC Motorhome Page
http://www.gmcmotorhome.com
distributor and an extra coil and cap. I was eluded by the main object
of my search - 76 to 78 Eldorado rear disc brake hardware. The rotors
and backing plates can be modified to fit the GMC. Found two first
generation Eldos - both with complete drivetrains for anyone that wants
to do a 500 Caddy conversion(not me!). One was a nearly complete
convertible. Also found a bunch of third generation cars.
My question is - does anyone know if the backing plates and calipers
were the same on the third gen Eldos? I know the rotors are thinner,
but I'm thinking they may be the same diameter. Sure, I could just send
TSM $560 for their backing plates and rotors, but where would the
challenge be in that!?
Patrick
- --
Patrick Flowers
Mailto
The GMC Motorhome Page
http://www.gmcmotorhome.com