Door latch

[darren paget]

I can't find my parts cross reference book for part numbers. I was going
to go buy a new door paddle for the interior side of the entrance door.
Is this the one that is a Peterbuilt number? Could someone who has their
book handy please look it up for me and send me the proper part number?
Thanks very much people. Darren

- --
Darren Paget
76 Experimental
Another Fab Day
http://www.TZEplus.com

 

[roger black]

Darren,
Go to GMC mart. The door handle is there with the number and a price. And
picture.
Roger

 

[dave mumert]

Hi Darren

This is quoted from previous posts. Is the paddle part of the latch or separate?

>Frank had our 78 Kingsley broken into so took it to the peterbilt dealer
>here in town. They told me the door latch was a Kenworth and we had a big go
>round with the latch they installed. Did not work and looked like H---L.
>They finally got the latch from cinnabar and it looks and works good.
>Tim & Cass Jones
>78 Kingsley
>Portland, Oregon
>weather just a bit better than the coast.
>80 - 88 all week no humidity

>The door entrance latch assembly is Peterbilt truck P/N 20-08229-R (see your
>GMCMI Parts Interchange Index).

_____________________________________________________________
> I didn't notice that someone was asking about a door handle and/or
>latch. The chrome, outside handle is Kenworth truck part# 35833-000-R and
>the latch mechanism is Peterbilt # 20-08229-R. I replaced the latch and
>there has been a great improvement in the door closing and sealing. The
>latch is about $20.00 US.

Dave Mumert
dave
- ----- Original Message -----
From: "Darren Paget"
To:
Sent: April 06, 2000 8:25 AM
Subject: GMC: Door latch

> I can't find my parts cross reference book for part numbers. I was going
> to go buy a new door paddle for the interior side of the entrance door.
> Is this the one that is a Peterbuilt number? Could someone who has their
> book handy please look it up for me and send me the proper part number?
> Thanks very much people. Darren
>
> --
> Darren Paget
> 76 Experimental
> Another Fab Day
> http://www.TZEplus.com
>

 

[marlene meineken]

Darren
Is this the # you are looking for?
Peterbuilt #20-08229R
Marlene Meineken

- ----- Original Message -----
From: Darren Paget
To:
Sent: Thursday, April 06, 2000 7:25 AM
Subject: GMC: Door latch

> I can't find my parts cross reference book for part numbers. I was going
> to go buy a new door paddle for the interior side of the entrance door.
> Is this the one that is a Peterbuilt number? Could someone who has their
Darren Paget
> 76 Experimental
> Another Fab Day
> http://www.TZEplus.com
>
>
>

 

[marlene meineken]

Darren
Was this the # you were looking for?
Peterbuilt #20-08229-R
I may be sending this twice if so Sorry.
Marlene Meineken

- ----- Original Message -----
From: Darren Paget
To:
Sent: Thursday, April 06, 2000 7:25 AM
Subject: GMC: Door latch

> I can't find my parts cross reference book for part numbers. I was going
> to go buy a new door paddle for the interior side of the entrance door.
> Is this the one that is a Peterbuilt number? Could someone who has their
> book handy please look it up for me and send me the proper part number?
> Thanks very much people. Darren
>
> --
> Darren Paget
> 76 Experimental
> Another Fab Day
> http://www.TZEplus.com
>
>
>

 

[philip l. stewart]

Somewhere way back in the Archives is a long post I did on my unsuccessful
experience with using the Kenworth (or was it Peterbilt) door latch part
number listed in the GMCMI Parts Index . I don't remember the specifics now
but I do remember that the part number was wrong. I ended up having to
install a used latch to cure the latch problem at the time. I still haven't
figured out good way to search to Archives or I would copy that post here
again. Anyway, good luck to all.
Phil Stewart
'76 Transmode, TN

 

[john wright]

Go to: http://www.gmcmart.com/ and search for door latch, The one
that you want is there.

>
> Somewhere way back in the Archives is a long post I did on my unsuccessful
> experience with using the Kenworth (or was it Peterbilt) door latch part
> number listed in the GMCMI Parts Index . I don't remember the specifics now
> but I do remember that the part number was wrong. I ended up having to
> install a used latch to cure the latch problem at the time. I still haven't
> figured out good way to search to Archives or I would copy that post here
> again. Anyway, good luck to all.
> Phil Stewart
> '76 Transmode, TN

- --
J.R. Wright
GMC GreatLakers
77 Eleganza II
Michigan

 

[jim bounds1]

Phil,

Yes, the Kenwoth cross # does work with a modification.

The KW latch is for an outside utility door so it does not have provisions
for an inside latch handle. You have to weld an additional bracket to
allow the inside handle to be attached.

I have the part # at the shop if you would like it, please call.

Jim Bounds
- --------------------------

>Go to: http://www.gmcmart.com/ and search for door latch, The one
>that you want is there.
>

>>
>> Somewhere way back in the Archives is a long post I did on my unsuccessful
>> experience with using the Kenworth (or was it Peterbilt) door latch part
>> number listed in the GMCMI Parts Index . I don't remember the specifics
now
>> but I do remember that the part number was wrong. I ended up having to
>> install a used latch to cure the latch problem at the time. I still
haven't
>> figured out good way to search to Archives or I would copy that post here
>> again. Anyway, good luck to all.
>> Phil Stewart
>> '76 Transmode, TN
>
>--
>J.R. Wright
>GMC GreatLakers
>77 Eleganza II
>Michigan
>
>