dinette

[pat morrison]

Hi,, GMCers I'm a furniture maker and use Corian and hardwood in my
furniture...If there is enough interest, i might make up some tops . I don't
have a dinette in my GMC so don't know what size is needed... Pat Morrison
74 PD Tn.

 

[tmaki1]

Pat,

I could be very interested in a new counter top for my 73 Glacier 23'.

Corian is just what I want. Will you do edge routing and cutouts for
sink, range top, etc.? Any pix we could look at to get some idea of
possibilities?

Discuss how one would get something like this going, and ball park
some pricing.

Contact via private email to discuss if you prefer.

Thanks!

Toby Maki
73 Glacier 230

> Hi,, GMCers I'm a furniture maker and use Corian and hardwood in my
> furniture...If there is enough interest, i might make up some tops . I don't
> have a dinette in my GMC so don't know what size is needed... Pat Morrison
> 74 PD Tn.
>

 

[roy cummings]

>
> Hi,, GMCers I'm a furniture maker and use Corian and hardwood in my
> furniture...If there is enough interest, i might make up some tops . I don't
> have a dinette in my GMC so don't know what size is needed... Pat Morrison
> 74 PD Tn.

Hi Pat,

I'm interested. What about using thinner Corian for some weight
savings?

Roy

 

[richard waters]

Pat,
How about the kitchen counter. It sure would be nice to upgrade that
as well.
Richard Waters '76 PB, Troy, MI

> Hi,, GMCers I'm a furniture maker and use Corian and hardwood in my
> furniture...If there is enough interest, i might make up some tops . I don't
> have a dinette in my GMC so don't know what size is needed... Pat Morrison
> 74 PD Tn.

 

[john dolan]

>>>>>>>>>>>>
Pat, I could be very interested in a new counter top for my 73
Glacier 23'. Corian is just what I want. Will you do edge routing
and cutouts for sink, range top, etc.? Any pix we could look at
to get some idea of possibilities? Discuss how one would get
something like this going, and ball park some pricing. Contact
via private email to discuss if you prefer. Thanks! Toby Maki
>>>>>>>>>>>>>

I would be interested too... maybe another post or two would
not abuse the intent of the rule, and take up bandwidth
inappropriately. (especially if there could be a mix of GMC DIY
and your Commercial Content). Maybe a pointer to another site
would also be appropriate, after that.

I'll abide by whatever the ruling is, but I'm not sure at this point.

Regards... John 74 Glacier near Washington, DC

 

[neely butler]

Pat,
Where are you in TN? I am in Lebanon, 30 miles E. of Nashville.
Neely.Butler
- -----Original Message-----
From: Pat Morrison
To: GMC mailing list
Date: Thursday, November 04, 1999 11:31 AM
Subject: GMC: dinette

>Hi,, GMCers I'm a furniture maker and use Corian and hardwood in my
>furniture...If there is enough interest, i might make up some tops . I
don't
>have a dinette in my GMC so don't know what size is needed... Pat Morrison
>74 PD Tn.
>
>

 

[walter bright]

Hi Pat;

This would be exactly what I am after. I also want to re-do the
counter top with the Corian, and needed to discuss some of the specifics
like sink choices for example. Bottom line, I am interested.
walter bright, 76 GB, Delanco, NJ.

>
> Hi,, GMCers I'm a furniture maker and use Corian and hardwood in my
> furniture...If there is enough interest, i might make up some tops . I don't
> have a dinette in my GMC so don't know what size is needed... Pat Morrison
> 74 PD Tn.

 

[tom warner]

There are other solid surface products on the market pat have you tried
them. I have a large cabinet shop to, however it is just a hobby. Am lucky
enough to have all of the professional tools however. have not been able to
get corian to work with. They only want to sell it to profesionals that
have attended a course to use it.

>Pat,
>
>If you are taking a head count on interested parties for corian dinettes,
>please count my head too. Someone also mentioned counter top, which makes
>good sense to have matching surfaces. See what your getting yourself into?
>I'm betting your experience as a furniture maker will result in a superb
>product. Hope it flies!
>
>Dave Meekhof
>73 GoBus 230
>
>