Compresser air line filter

[bill & joan satterfield]

Well my old dana finally gave up the ghost alltogether
Am considering switching to Thomas 315 as am told parts are not being made for
dana anymore.
Discovered that my inline filter behind dana was inoperable due to cracked bowl.
Can seal bowl but then would lose water drain capability. Cant find new bowl
locally and wondered what make, model# etc filter to look for that would take
out water and dirt and still be small enough to fit in space available TIA
Bill 76 Edgemont

>

 

[gary miller]

Call Jim Bounds for replacement 877-275-4462 toll free.
Gary
'77 Kingsley
North Bend, Oegon Coast

> Well my old dana finally gave up the ghost alltogether
> Am considering switching to Thomas 315 as am told parts are not being made for
> dana anymore.
> Discovered that my inline filter behind dana was inoperable due to cracked bowl.
> Can seal bowl but then would lose water drain capability. Cant find new bowl
> locally and wondered what make, model# etc filter to look for that would take
> out water and dirt and still be small enough to fit in space available TIA
> Bill 76 Edgemont
>
> >

 

[bill & joan satterfield]

Thanks Gary Just got off the line with Jim $22.00
Bill 76 Edgemont

> Call Jim Bounds for replacement 877-275-4462 toll free.
> Gary
> '77 Kingsley
> North Bend, Oegon Coast
>

>
> > Well my old dana finally gave up the ghost alltogether
> > Am considering switching to Thomas 315 as am told parts are not being made for
> > dana anymore.
> > Discovered that my inline filter behind dana was inoperable due to cracked bowl.
> > Can seal bowl but then would lose water drain capability. Cant find new bowl
> > locally and wondered what make, model# etc filter to look for that would take
> > out water and dirt and still be small enough to fit in space available TIA
> > Bill 76 Edgemont
> >
> > >

 

[bill & joan satterfield]

Emery Thanks for information. You're probably right as it is a plastic
bowl.I've got a replacement
coming from Jim Bounds though.
While I'm at it, I believe you're the one who gave me the tip on 54" headliner
material. Most places I found would only sell it in 35 yard bolts but I found a
contractor with several partial rolls and got 33 lineal feet of 100% vinyl for
25.00. Went up fairly easy and looks really good. My next project will be to
find replacement for Sol Aire Furnace and get it installed this summer. I see
some replacements that call for cutting hole in side of coach but would rather
not do that. Open
to any suggestions. TIA
Bill 76 Edgemont

>
> bowl.
> Can seal bowl but then would lose water drain capability. Cant find new bowl
> >>
>
> Bill -- since the original didn't come with a bowl, your unit probably has
> the filter kit provided by Cinnibar. They use a small polycarbonate plastic
> bowl and can provide a replacement. If you bowl is glass it must be some
> other companys.
>
> Emery Stora
> 77 Kingsley
> Santa Fe, NM

 

[david l greenberg]

My next project
>will be to
>find replacement for Sol Aire Furnace and get it installed this
>summer. I see
>some replacements that call for cutting hole in side of coach but
>would rather
>not do that. Open
>to any suggestions. TIA
>Bill 76 Edgemont
When I was at Sirum's yesterday one of his guys was installing a new
furnace that req'd different holes. They had a nice plate that covered
the old and allowed the new holes. Not too bad looking. Don't know what
kind of furnace.

David Lee Greenberg
GMC Motorhome Registry
and Boston Homes, Inc.
800-827-9989