Ceramic Coating

[chuck will]

One More Time for all of you that want the superior heat extractor for
your GMC Engine Compartment, a little better milage and a whole lot of
power. HPC on the www. also the 800 number is 456-4721. Talk to Cory
Ure. To my knowledge (which is somewhat limited) there are only two
places in the USA (due to EPA0 environmental Protection that have
licensed this process. Both are owned by one company HPC, High
Performace Coatings. The one in Oklahoma can do the insides and the
outsides and the one in Utah can only do the outsides. ONE MORE TIME.
You can purchase the Thornly Headers from them with the coatings more
reasonable than purchasing them from Thornly and have to have their
coating removed. Thornly puts on a coating that looks like chrome and
is pretty to look at. But cost a bit to have removed. It is not a Jet
Hot Coating it is a High Performance Coating. There is a difference.
Sort of like our GMC and the rest of the coaches runing around on our
highways. Give Cory a call he will answere all your questions. ONE
MORE TIME. My headers from Cory were just about the same cost with
shipping as they were from Mondellos but without the Ceramic Coating.
Check it out. Chuck

 

[bartz paul]

Chuck:

I have to question your statement that HPC SLC plant can't do the inside. I
toured the place two years ago this month and they were doing the inside and
outside both.

Did something change????

Paul Bartz

From: Chuck Will [mailto:willa]
Sent: Friday, December 11, 1998 12:01 PM
To: davegreenberg1; gmcmotorhome
Subject: GMC: Ceramic Coating

. The one in Oklahoma can do the insides and the outsides and the one in
Utah can only do the outsides.

 

[zachary zehnacker]

Chuck

The view of Jet Hot vs. HPC is the other way around in the racing world.
Most racers view Jet Hot as the more desireable GMC of coatings . This
is probably due to Jet Hot's advertising and contingency payouts though and
may not have anything to do with which product is better.

Zak

>is pretty to look at. But cost a bit to have removed. It is not a Jet
>Hot Coating it is a High Performance Coating. There is a difference.
>Sort of like our GMC and the rest of the coaches runing around on our
>highways. Give Cory a call he will answere all your questions. ONE

 

[chuck will]

Hey! Paul, you'll have to talk to Cory. He is the one that told me that their
plant in SLC was not capable of doing them. I may have mixed this up but he got
mine done and they not only look great but work as well as advertised. I am
concerned with the right side inner wheel well but have been told not too! But
the header is quite close to it. It really is clean and shiny in the engine
compartment. Almost as shiny as the HD that I traded. Chuck

> Chuck:
>
> I have to question your statement that HPC SLC plant can't do the inside. I
> toured the place two years ago this month and they were doing the inside and
> outside both.
>
> Did something change????
>
> Paul Bartz
>
> From: Chuck Will [mailto:willa]
> Sent: Friday, December 11, 1998 12:01 PM
> To: davegreenberg1; gmcmotorhome
> Subject: GMC: Ceramic Coating
>
> . The one in Oklahoma can do the insides and the outsides and the one in
> Utah can only do the outsides.