Cascader down @Eugene, OR

[bill guise1]

On the way to the Coos Bay Rally, made it to Eugene, OR, coach at a shop,
will disassemble Monday morning with "luck". Owner Joe Johansen is very
capable, probably needs long axle (he has) and/or a final drive 3.5 (he does
not have). Joe is back in Kent, WA, gathering parts, but is in need of a
final drive. If you are in WA, OR or on your way to the Coos Bay rally and
think you can help, give Joe a call @206.878.3583 or cell 253.350.6967

He plans to return to Eugene Monday morning.

 

[Jim Hupy]

Bill, I have a 3:07 but no 3:55. I have a 3:55 coming to Coos Bay to be
installed in Alan Story's coach the following Monday after the Rally. His
coach has a 3:42 and is noisy. Needs bearings & ???. So that one will need
some work before it can be used. Sorry, no help this time.
Jim Hupy

> On the way to the Coos Bay Rally, made it to Eugene, OR, coach at a shop,
> will disassemble Monday morning with "luck". Owner Joe Johansen is very
> capable, probably needs long axle (he has) and/or a final drive 3.5 (he
> does
> not have). Joe is back in Kent, WA, gathering parts, but is in need of a
> final drive. If you are in WA, OR or on your way to the Coos Bay rally and
> think you can help, give Joe a call @206.878.3583 or cell 253.350.6967
>
> He plans to return to Eugene Monday morning.
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>

 

[jim kanomata1]

Jim hupy might have a used one

Sent from my iPhone

>
> On the way to the Coos Bay Rally, made it to Eugene, OR, coach at a shop,
> will disassemble Monday morning with "luck". Owner Joe Johansen is very
> capable, probably needs long axle (he has) and/or a final drive 3.5 (he does
> not have). Joe is back in Kent, WA, gathering parts, but is in need of a
> final drive. If you are in WA, OR or on your way to the Coos Bay rally and
> think you can help, give Joe a call @206.878.3583 or cell 253.350.6967
>
> He plans to return to Eugene Monday morning.
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

 

[bil]

Thanks Jim, he was my first call, he does have one, from you I think, but is getting installed after the Coos Bay rally for a customer. Have located one to get Joe back on the road, so that problem is solved for now! Thanks for jumping in, Bill

Sent from my iPad
Bill & Peggy Guise, Kent, WA

Jim hupy might have a used one

Sent from my iPhone

>
> On the way to the Coos Bay Rally, made it to Eugene, OR, coach at a shop,
> will disassemble Monday morning with "luck". Owner Joe Johansen is very
> capable, probably needs long axle (he has) and/or a final drive 3.5 (he does
> not have). Joe is back in Kent, WA, gathering parts, but is in need of a
> final drive. If you are in WA, OR or on your way to the Coos Bay rally and
> think you can help, give Joe a call @206.878.3583 or cell 253.350.6967
>
> He plans to return to Eugene Monday morning.
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

 

[bil]

Thanks Jim, you were Joes first call but you were not home. Have a final
drive to get him going, will see how Monday unfolds for him. Appreciate
your communication on this, Bill

-----Original Message-----
From: Gmclist [mailto:gmclist-bounces] On Behalf Of James
Hupy
Sent: Saturday, October 8, 2016 4:44 PM
To: gmclist
Subject: Re: [GMCnet] Cascader down @Eugene, OR

Bill, I have a 3:07 but no 3:55. I have a 3:55 coming to Coos Bay to be
installed in Alan Story's coach the following Monday after the Rally. His
coach has a 3:42 and is noisy. Needs bearings & ???. So that one will need
some work before it can be used. Sorry, no help this time.
Jim Hupy

> On the way to the Coos Bay Rally, made it to Eugene, OR, coach at a
> shop, will disassemble Monday morning with "luck". Owner Joe Johansen
> is very capable, probably needs long axle (he has) and/or a final
> drive 3.5 (he does not have). Joe is back in Kent, WA, gathering
> parts, but is in need of a final drive. If you are in WA, OR or on
> your way to the Coos Bay rally and think you can help, give Joe a call
> @206.878.3583 or cell 253.350.6967
>
> He plans to return to Eugene Monday morning.
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org