Misc Parts

B

Bhart

Well-known member
Oct 14, 2022
665
367
63
LaGrange, Wyoming
I have several items that I would like to sell:
All items will be negotiable. Photos by request

2 Door strikes
Inner and outer wheel caps
8 Alcoa wheel covers 2 good, 2 labels unreadable, and 2 no label.

2 hatch plates
outer and inner wheel axle cv joints.
Several upper cabinet door hinges
Bath and closet handle

Face plate for electro level 1 with small hole for light
2 face plates for light switches with 2 gally, 1 porch, and 1 floor switch.
1 complete inner door handle and mechanism. Original GM part new old part
dash label holders
2 rubber brake pads
1 accelerator pad
7 vacuum cans for cruise control has coating of RTV to seal up leaks. (idea from Ken H.) vac tested with Mighty Vac

2 timing mark indicator
1 Onan interior face plate with lighted switch, prime button, hour meter ng.
1 Onan interior lighted switch
1 suburban heater exterior face plate
2 refrigerator door latches
1 fuel selector valve
.
2 engine oil dip stick tubes for block only
1 tranny dip stick to front grill area.
1 carburetor cable mount plate
Assortment of 455 engine brackets, power steering pump, alternator, a/c compressor, fan shroud
Front motor mount
3 sets of torsion bars
various pork chops
screws and nuts for pork chops
Muffler bearings 2 1/2"

If you need something ask I may have it.


GAVE PARTS AWAY. NOTHING LEFT
 
Last edited:
In our wet bath, we have holes in the fore and aft sides, suggesting something was there.

At the RV MH Hall of Fame, theirs has a towel hangers iirc

Do you have those for sale?
 
  • Like
Reactions: Don Jaksa
Bhart said:
I have several items that I would like to sell:
All items will be negotiable. Photos by request

2 Door strikes
Inner and outer wheel caps
8 Alcoa wheel covers 4 good, 2 labels unreadable, and 2 no label.
2 complete hatch plate, screw, and fender nut
2 hatch plates
outer and inner wheel axle cv joints.
Several upper cabinet door hinges
Bath and closet handle

Face plate for electro level 1
2 face plates for light switches with 2 gally, 1 porch, and 1 floor switch.
1 complete inner door handle and mechanism. Original GM part
2 sets of dash label holders
2 rubber brake pads
1 accelerator pad
7 vacuum cans for cruise control has coating of RTV to seal up leaks. (idea from Ken H.) vac tested with Mighty Vac

1 timing mark indicator
1 Onan interior face plate with lighted switch, prime button, hour meter ng.
1 Onan interior lighted switch
1 suburban exterior face plate
2 refrigerator door latches
1 fuel selector valve
.
2 engine oil dip stick tubes for block only
1 tranny dip stick to front grill area.
1 carburetor cable mount plate
Assortment of 455 engine brackets, power steering pump, alternator, a/c compressor, fan shroud
Front motor mount
3 sets of torsion bars various pork chops with screws and nuts
Muffler bearings 3" and 2 1/2"

If you need something ask I may have it.
Click to expand...
Good morning, do you still have the muffler bearings and carburetor cable mount plate (please send photos if possible) and what would the price be? You can send photos to rsanfilippo59@gmail.com if needed. Thank you. Gino Sanfilippo
 
  • Like
Reactions: tmsnyder
Bhart said:
I have several items that I would like to sell:
All items will be negotiable. Photos by request

2 Door strikes
Inner and outer wheel caps
8 Alcoa wheel covers 4 good, 2 labels unreadable, and 2 no label.
2 complete hatch plate, screw, and fender nut
2 hatch plates
outer and inner wheel axle cv joints.
Several upper cabinet door hinges
Bath and closet handle

Face plate for electro level 1
2 face plates for light switches with 2 gally, 1 porch, and 1 floor switch.
1 complete inner door handle and mechanism. Original GM part
2 sets of dash label holders
2 rubber brake pads
1 accelerator pad
7 vacuum cans for cruise control has coating of RTV to seal up leaks. (idea from Ken H.) vac tested with Mighty Vac

1 timing mark indicator
1 Onan interior face plate with lighted switch, prime button, hour meter ng.
1 Onan interior lighted switch
1 suburban exterior face plate
2 refrigerator door latches
1 fuel selector valve
.
2 engine oil dip stick tubes for block only
1 tranny dip stick to front grill area.
1 carburetor cable mount plate
Assortment of 455 engine brackets, power steering pump, alternator, a/c compressor, fan shroud
Front motor mount
3 sets of torsion bars various pork chops with screws and nuts
Muffler bearings 3" and 2 1/2"

If you need something ask I may have it.
Click to expand...
What exactly do you mean by "hatch plates"?
 
76JIMMY said:
Good morning, do you still have the muffler bearings and carburetor cable mount plate (please send photos if possible) and what would the price be? You can send photos to rsanfilippo59@gmail.com if needed. Thank you. Gino Sanfilippo
Click to expand...
I am currently out of state and won't be home until next Wednesday. So what hole size diameter do you need
2.5 or 3.0 inch.
 
Bruce Hart said:
I am currently out of state and won't be home until next Wednesday. So what hole size diameter do you need
2.5 or 3.0 inch.
Click to expand...
Hi there,
Gino checked and we will need the 3.0 inch muffler bearings along with the carburetor cable mount plate.
I will wait to hear from you when you get home, no rush.. Safe travels
Thanks again,
Gino and Rose Sanfilippo
 
76JIMMY said:
Hi there,
Gino checked and we will need the 3.0 inch muffler bearings along with the carburetor cable mount plate.
I will wait to hear from you when you get home, no rush.. Safe travels
Thanks again,
Gino and Rose Sanfilippo
Click to expand...
Please send me your address and I get the parts sent to you.
76JIMMY said:
Hi there,
Gino checked and we will need the 3.0 inch muffler bearings along with the carburetor cable mount plate.
I will wait to hear from you when you get home, no rush.. Safe travels
Thanks again,
Gino and Rose Sanfilippo
Click to expand...
I sent a photo under conversations. Are these the parts you need?
 
Get your shine on at www.cruzingear.co
Applied GMC

Share this page

Share this page
Top Bottom
Back